DF2210CUNP24V Renesas Electronics America, DF2210CUNP24V Datasheet - Page 669

• Manufacturer Part Number: DF2210CUNP24V
• Description: MCU 16BIT FLASH 3V 32K 64-QFN
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of DF2210CUNP24V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: SCI, SmartCard, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 37
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

20.1.2
TCSR_1 controls the operation in power-down mode transition.
Bit
7 to 5 ⎯
4
3 to 0 —
Bit Name
PSS
Timer Control/Status Register (TCSR_1)
All 0
0
All 0
Initial Value
R/W
⎯
R/W
—
Description
Reserved
The write value should always be 0.
Prescaler Select
0: When the SLEEP instruction is executed in high-
1: When the SLEEP instruction is executed in high-
Write:
TCSR_1 must be written to by a word transfer
instruction. The upper byte of the written word must
contain H′A5 and the lower byte must contain the
write data. (When the PSS bit is set to 1, the upper
byte of the written word must contain H'A510.)
Read:
TCSR_1 is read by the same procedure as for the
general registers.
Reserved
The write value should always be 0.
TCSR_1 differs from other registers in being more
speed mode or medium-speed mode, operation
shifts to sleep mode or software standby mode.
speed mode or medium-speed mode, operation
shifts to sleep mode, watch mode, or subactive
mode.
When the SLEEP instruction is executed in
subactive mode, operation shifts to subsleep
mode, watch mode, or high-speed mode
difficult to write to. The procedures for writing to
and reading this register are given below.
Rev.7.00 Dec. 24, 2008 Page 613 of 698
REJ09B0074-0700