HD6417727F100V Renesas Electronics America, HD6417727F100V Datasheet - Page 633

• Manufacturer Part Number: HD6417727F100V
• Description: MPU 3V 16K PB-FREE 240-QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727F100V

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Bit 5—Transmit Enable (TE): Enables or disables the SCIF serial transmitter.
Bit 5: TE
0
1
Note: * Serial transmission starts after writing of transmit data into the SCFTDR2. Select the
Bit 4—Receive Enable (RE): Enables or disables the SCIF serial receiver.
Bit 4: RE
0
1
Notes: 1. Clearing RE to 0 does not affect the receive flags (DR, ER, BRK, FER, and PER).
Bits 3 and 2—Reserved: These bits are always read as 0. The write value should always be 0.
Bits 1 and 0—Clock Enable 1 and 0 (CKE1 and CKE0): These bits should always be set to 00.
transmit format in the SCSMR2 and SCFCR2 and reset the SCFTDR2 before setting TE to
1.
2. Serial reception starts when a start bit is detected. Select the receive format in the
These flags retain their previous values.
SCSMR2 before setting RE to 1.
Description
Transmitter disabled.
Transmitter enabled. *
Description
Receiver disabled. *
Receiver enabled. *
2
1
Section 19 Serial Communication Interface with FIFO (SCIF)
Rev.6.00 Mar. 27, 2009 Page 575 of 1036
REJ09B0254-0600
(Initial value)
(Initial value)