SAF-XC886CLM-8FFI 5V AC Infineon Technologies, SAF-XC886CLM-8FFI 5V AC Datasheet - Page 101

• Manufacturer Part Number: SAF-XC886CLM-8FFI 5V AC
• Description: IC MCU 8BIT FLASH TQFP-48
• Manufacturer: Infineon Technologies
• Series: XC8xxr

Specifications of SAF-XC886CLM-8FFI 5V AC

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 48-TFQFP
• Core Processor: XC800
• Core Size: 8-Bit
• Speed: 103.2MHz
• Connectivity: CAN, LIN, SSI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 34
• Ram Size: 1.75K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Data Bus Width: 8 bit
• Data Ram Size: 1.75 KB
• Interface Type: JTAG/SPI/SSC/UART
• Maximum Clock Frequency: 24 MHz
• Number Of Programmable I/os: 48
• Number Of Timers: 4
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With: MCBXC88X - BOARD EVAL FOR INFINEON XC88X
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: FX886CLM8FFI5VACXT; SAF-XC886CLM-8FFI AB; SAF-XC886CLM-8FFI AB; SAFXC886CLM8FFIABT; SP000217341

3.18
Timer 2 and Timer 21 are 16-bit general purpose timers (THL2) that are fully compatible
and have two modes of operation, a 16-bit auto-reload mode and a 16-bit one channel
capture mode, see
(if prescaler is disabled). As a counter, they count 1-to-0 transitions on pin T2. In the
counter mode, the maximum resolution for the count is PCLK/24 (if prescaler is
disabled).
Table 33
Mode
Auto-reload Up/Down Count Disabled
Channel
capture
Data Sheet
Timer 2 and Timer 21
Timer 2 Modes
Description
•
•
•
•
•
Up/Down Count Enabled
•
•
•
•
•
•
•
•
•
•
•
Count up only
Start counting from 16-bit reload value, overflow at FFFF
Reload event configurable for trigger by overflow condition only, or by
negative/positive edge at input pin T2EX as well
Programmble reload value in register RC2
Interrupt is generated with reload event
Count up or down, direction determined by level at input pin T2EX
No interrupt is generated
Count up
– Start counting from 16-bit reload value, overflow at FFFF
– Reload event triggered by overflow condition
– Programmble reload value in register RC2
Count down
– Start counting from FFFF
– Reload event triggered by underflow condition
– Reload value fixed at FFFF
Count up only
Start counting from 0000
Reload event triggered by overflow condition
Reload value fixed at 0000
Capture event triggered by falling/rising edge at pin T2EX
Captured timer value stored in register RC2
Interrupt is generated with reload or capture event
Table
RC2
33. As a timer, the timers count with an input clock of PCLK/12
94
H
, overflow at FFFF
H
H
, underflow at value defined in register
H
H
Functional Description
XC886/888CLM
V1.2, 2009-07
H
H