SAK-XC161CS-32F40F BB-A Infineon Technologies, SAK-XC161CS-32F40F BB-A Datasheet - Page 47

• Manufacturer Part Number: SAK-XC161CS-32F40F BB-A
• Description: IC MCU 16BIT 256KB TQFP-144-19
• Manufacturer: Infineon Technologies
• Series: XC16xr

Specifications of SAK-XC161CS-32F40F BB-A

• Core Processor: C166SV2
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: CAN, EBI/EMI, I²C, SPI, UART/USART
• Peripherals: PWM, WDT
• Number Of I /o: 99
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 2.7 V
• Data Converters: A/D 12x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-LFQFP
• Data Bus Width: 16 bit
• Data Ram Size: 12 KB
• Interface Type: ASC, CAN, IIC, SSC
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 99
• Number Of Timers: 9
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Packages: PG-TQFP-144
• Max Clock Frequency: 40.0 MHz
• Sram (incl. Cache): 12.0 KByte
• Can Nodes: 2
• A / D Input Lines (incl. Fadc): 12
• Program Memory: 256.0 KByte
• For Use With: MCBX167-NET - BOARD EVAL INFINEON CAN/ETHRNTMCBXC167-BASIC - BOARD EVAL BASIC INFINEON XC16X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: KX161CS32F40FBBANT; KX161CS32F40FBBAXT; SAKXC161CS32F40FBBAT; SP000098775; SP000224544

Summary of Features
•
•
•
•
•
•
•
Note: When a CAN node has the interface lines assigned to Port 4, the segment address
3.13
The integrated IIC Bus Module handles the transmission and reception of frames over
the two-line IIC bus in accordance with the IIC Bus specification. The IIC Module can
operate in slave mode, in master mode or in multi-master mode. It can receive and
transmit data using 7-bit or 10-bit addressing. Up to 4 send/receive data bytes can be
stored in the extended buffers.
Several physical interfaces (port pins) can be established under software control. Data
can be transferred at speeds up to 400 kbit/s.
Two interrupt nodes dedicated to the IIC module allow efficient interrupt service and also
support operation via PEC transfers.
Note: The port pins associated with the IIC interfaces must be switched to open drain
Data Sheet
CAN functionality according to CAN specification V2.0 B active
Data transfer rate up to 1 Mbit/s
Flexible and powerful message transfer control and error handling capabilities
Full-CAN functionality and Basic CAN functionality for each message object
32 flexible message objects
– Assignment to one of the two CAN nodes
– Configuration as transmit object or receive object
– Concatenation to a 2-, 4-, 8-, 16-, or 32-message buffer with FIFO algorithm
– Handling of frames with 11-bit or 29-bit identifiers
– Individual programmable acceptance mask register for filtering for each object
– Monitoring via a frame counter
– Configuration for Remote Monitoring Mode
Up to eight individually programmable interrupt nodes can be used
CAN Analyzer Mode for bus monitoring is implemented
output on Port 4 must be limited. CS lines can be used to increase the total amount
of addressable external memory.
mode, as required by the IIC specification.
IIC Bus Module
45
Functional Description
XC161CS-32F
Derivatives
V1.2, 2006-08