3059Y-1-500LF Bourns Inc., 3059Y-1-500LF Datasheet - Page 14
![TRIMPOT 50 OHM 1.25"REC CER MT](/photos/8/49/84988/3059y_series_sml.jpg)
3059Y-1-500LF
Manufacturer Part Number
3059Y-1-500LF
Description
TRIMPOT 50 OHM 1.25"REC CER MT
Manufacturer
Bourns Inc.
Series
3059 - Sealedr
Specifications of 3059Y-1-500LF
Temperature Coefficient
±100ppm/°C
Resistance (ohms)
50
Termination Style
PC Pin
Power (watts)
1W
Tolerance
±10%
Number Of Turns
22
Adjustment Type
Side Adjustment
Resistive Material
Cermet
Mounting Type
Chassis Mount
Package / Case
Rectangular - 1.250" L x 0.190" W x 0.315" H (31.75mm x 4.83mm x 8.00mm)
Track Resistance
50ohm
No. Of Turns
22
Resistance Tolerance
± 10%
Power Rating
1W
Potentiometer Mounting
Through Hole
Resistance
50 Ohms
Operating Temperature Range
- 55 C to + 150 C
Element Type
Cermet
Dimensions
6.10 mm W x 31.75 mm L
Product
Trimmers
Taper
Linear
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Electrical Characteristics
Resistive
Standard Resistance Range .......................................................................10
Resistance Tolerance (Untrimmed) ......................................................................±10 %
Resistance Tolerance (Trimmed)..........................................................................±0.5 %
Independent Linearity ...........................................................................Down to ±0.5 %
Resolution ...............................................................................................................Infinite
Electrical Travel.....................................................................................Per Requirement
Ratio Matching ..........................................................................................................0.1 %
Conductive
Resistivity .............................................................................................Down to 3 µ ·cm
Environmental Characteristics
Power Rating.............................................................................................................0.5 W
Temperature Range .............................................................................-55 °C to +150 °C
TCR ...............................................................................................................± 100 ppm/K
Humidity (MIL-STD-202 Method 106) .......................................................± 1 % TRS
Vibration (30 G)...............................................................................................± 1 % TRS
Shock (100 G)...................................................................................................± 1 % TRS
Load Life (1,000 h)...........................................................................................± 2 % TRS
Rotational Life..............................................................................Up to 1,000,000 cycles
Thermal Shock (-55 °C/+150 °C) ...................................................................± 1% TRS
12
Thick-Film (Cermet) Devices
Using our thick-film printing expertise, Bourns® Trimpot®
Division has many possible applications such as ceramic
heaters for medical, industrial, military and commercial
applications.
Features
• High temperature operation
• Improved high frequency performance
• Excellent thermal conductivity
• Reduced piece part and size
• Design flexibility
• Custom specific
• High life cycles
• Reduced time to market for new ideas
to 1 M
Physical Characteristics
Substrate Materials ..................Alumina
Ink Materials.............................Resistive
Conductor Line Width
Conductor Line Thickness
Conductor Line Spacing
Track Adhesion ...................1.58 N/mm
Solder Acceptance ..........99 % coverage
Solder Leach Resistance............5 cycles
Additional Capabilities
• Placement of Add-On Components
• RF Design
• Through-Hole Print
• Multi-Layer Print
• Double-Sided Print
• Custom Tapers
• Plating Operation
• Solder Paste Deposition
Specifications are typical and dependent on
the manufacturing method, materials, size
and shape of the part.
..............................min. 8 µm (0.3 µ˝)
..........................0.157 mm (0.0062 ˝)
............................0.127 mm (0.005 ˝)
Conductive (Au, Ag, AgPd)
Aluminum Nitride
Dielectric