UPD78F0886GA(A)-GAM-AX NEC, UPD78F0886GA(A)-GAM-AX Datasheet - Page 3

• Manufacturer Part Number: UPD78F0886GA(A)-GAM-AX
• Description: 8BIT MCU, 60K FLASH, 3KB RAM, CAN
• Manufacturer: NEC

Specifications of UPD78F0886GA(A)-GAM-AX

• Controller Family/series: UPD78F
• No. Of I/o's: 41
• Ram Memory Size: 3KB
• Cpu Speed: 20MHz
• No. Of Timers: 8
• No. Of Pwm Channels: 6
• Digital Ic Case Style: LQFP
• Core Size: 8bit
• Program Memory Size: 60KB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Caution: Purchase of NEC I
1
2
3
PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note:
Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and
ultimately degrade the device operation. Steps must be taken to stop generation of static electricity
as much as possible, and quickly dissipate it once, when it has occurred. Environmental control
must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using
insulators that easily build static electricity. Semiconductor devices must be stored and transported
in an anti-static container, static shielding bag or conductive material. All test and measurement
tools including work bench and floor should be grounded. The operator should be grounded using
wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need
to be taken for PW boards with semiconductor devices on it.
HANDLING OF UNUSED INPUT PINS FOR CMOS
Note:
No connection for CMOS device inputs can be cause of malfunction. If no connection is provided
to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence
causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels
of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused
pin should be connected to V
being an output pin. All handling related to the unused pins must be judged device by device and
related specifications governing the devices.
STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note:
Power-on does not necessarily define initial status of MOS device. Production process of MOS
does not define the initial operation status of the device. Immediately after the power source is
turned ON, the devices with reset function have not yet been initialized. Hence, power-on does
not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the
reset signal is received. Reset operation must be executed immediately after power-on for devices
having reset function.
components in an I
defined by Philips.
IEBus is a trademark of NEC Corporation.
2
2
C components conveys a license under the Philips I
C system, provided that the system conforms to the I
NOTES FOR CMOS DEVICES
DD
or GND with a resistor, if it is considered to have a possibility of
User's Manual U12326EJ4V0UM
2
C Patent Rights to use these
2
C Standard Specification as
3