NFK3-SC FLUKE NETWORKS, NFK3-SC Datasheet - Page 220

• Manufacturer Part Number: NFK3-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK3-SC

• Lead Free Status / RoHS Status: na

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
Creating Custom Test Limits
You can create up to 10 custom test limits. Each custom
limit can include up to 5 fiber types.
1
2
3
11-4
Press
On the CUSTOM LIMIT LIST screen, do one of the
following:
•
•
When you add a new limit, 3 generic fiber types
are placed in the new limit by default.
Use the LIMIT TABLE EDITOR screen to see or define
test parameters for the fiber types you will test. Figure
11-2 shows an example of this screen.
•
Select an existing custom limit to edit.
Press
baseline for a new limit.
To see the properties of a factory-installed fiber
type or to edit the properties of a custom fiber
type already used in the limit, use
highlight a fiber type; then press
F
A
; then select Edit Custom Test Limit.
Add Limit to select any existing limit as a
Note
t
KNLM
.
to
4
5
Selecting a factory-installed fiber type lets you see
the fiber’s properties, but you cannot edit them.
•
•
To add or edit test parameters, use
highlight a limit cell in the table; then press
11-2 and 11-3 describe the parameters available for
OTDR and loss/length test limits. It is not necessary to
enter test parameters for tests you will not run.
When you are finished entering test parameters on the
LIMIT TABLE EDITOR screen, do one of the following:
•
•
To add a fiber type to the custom limit press
Add Fiber Type; then select a fiber type from the
list or press
type. See the previous section for details on fiber
properties.
To remove a fiber type, highlight the fiber; then
press
To save the custom limit using the existing limit
name, press
To edit the name, press
s
name; then press
B
when you are finished entering a limit
Remove Fiber Type.
A
s
Create Fiber Type to create a new
s
Note
.
E
again to save the limit.
Edit Name. Press
KNLM
t
to
. Tables
A