NFK3-SC FLUKE NETWORKS, NFK3-SC Datasheet - Page 52

• Manufacturer Part Number: NFK3-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK3-SC

• Lead Free Status / RoHS Status: na

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
Cleaning and Inspecting Fiber
Connectors and Adapters
Always clean and inspect fiber connectors before making
connections.
Cleaning Bulkhead Connectors
1
2
3
4
2-4
Touch the tip of a fiber optic solvent pen or swab soaked
in solvent to a lint-free dry wipe or fiber cleaning card.
Touch a new, dry swab to the solvent spot on the wipe
or card. Push the swab into the connector, twist it
around 3 to 5 times against the end-face, then remove
and dispose of the swab.
Dry the connector with a dry swab by twisting it around
in the connector 3 to 5 times.
Inspect connectors with a fiber microscope, such as the
Fluke Networks FiberInspector
before making connections.
See Chapters 3 and 6 for instructions on cleaning
the tester's OTDR and loss/length connectors.
W
Caution
™
Video Microscope
Cleaning Fiber Adapters
Periodically clean fiber adapters with a swab and fiber optic
solvent. Dry with a dry swab before use.
Cleaning Connector Ends
1
2
•
Touch the tip of a fiber optic solvent pen or swab soaked
in solvent to a lint-free dry wipe or fiber cleaning card.
Wipe the connector end-face across the solvent spot,
then back and forth once across the dry area of the
wipe or card.
Some connector styles, such as VF-45, may require a
different cleaning method.
Always cover unused connectors with protective caps.
Clean caps periodically with a swab or wipe and fiber
optic solvent.
Note