NFK3-SC FLUKE NETWORKS, NFK3-SC Datasheet - Page 85

• Manufacturer Part Number: NFK3-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK3-SC

• Lead Free Status / RoHS Status: na

Settings for OTDR Tests
Table 3-1 describes the settings that apply to OTDR tests.
SETUP Tab
Job tab
Cable tab
Job settings
FIBER TYPE
Setting
Before you run a test you will save, you may want to set the job, fiber ID, and
cabling end information. These settings are saved with test results to identify
the job site, the cabling tested, and the test direction. See Chapter 2 foGr
details.
Select a fiber type that is appropriate for the type you will test. You can select
factory-installed fiber types or custom types, which you configure with the Edit
Custom Test Limit function in FUNCTIONS. See Chapter 10 for information on
creating custom fiber types.
Table 3-1. Settings for OTDR Tests
Select a fiber type before selecting a test limit. The fiber type determines
which test limits are available.
Description
Note
Setting Up for OTDR Testing
Using the OTDR
-continued-
3
3-9