NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 290

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

15
Setting
Operation
Setting
Operation
3-2-2 Stopping the Buzzer Sound
Stopping the Buzzer by Displaying a Screen for Which the Buzzer Attribute Is Not
Set
Buzzer, Backlight, and Display Control
14
13
12
11
10
0
9
8
7
6
5
The PT status control area must be allocated to a word in the host and, accord-
ingly, there are no special settings required for the control of buzzer.
The bit for controlling the PT status (PT status control bit) is provided at the fourth
word (n + 3 words) from the beginning of the PT status control area.
To sound the buzzer during the operation of the PT, operate the PT status control
area as indicated below.
Set 1 (ON) for the following bit in the fourth word (n + 3 words) from the beginning
of the PT status control area according to the required buzzer sound.
• Continuous sound:
• Short intermittent sound:
• Long intermittent sound:
With the PT, the following three methods are used for stopping the buzzer sound.
• Displaying a screen for which the buzzer attribute is not set
• Operating the PT status control area
• Pressing a touch switch which has the buzzer stop function
When this method is used, the buzzer stops sounding automatically when the
screen is switched to the one where the buzzer attribute is not set.
When creating a screen using the Support Tool, cancel the check mark for the
buzzer attribute at the screens where the buzzer should not sound. (Usually, the
buzzer attribute is not checked.)
When the screen for which the buzzer attribute is not checked is displayed dur-
ing operation of the PT, the buzzer automatically stops sounding. For the proce-
dure for switching the screen, refer to 3-3-1 Switching the Screen (page 289).
4
3
2
1
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Bits 2 and 3 are not used when the PT is in NT30/620 compatible
mode.
Screen display
Processing priority registration (for NT link (1:N))
Continuous buzzer
Intermittent buzzer (short)
Display history initialization
Not used
Intermittent buzzer (long)
Backlight mode
Screen printing
PT window opening
Numeral/character string input
PT screen switching
Memory table copy execution
Memory table copy type
Alarm history initialization
Not used
Controlled Item
Bit 13
Bit 12
Bit 9
Registered
Performed
Performed
Performed
Performed
Performed
Sounded
Sounded
Sounded
Disabled
Disabled
Disabled
Numeral
1 (ON)
Lit
Section
Always 0
Always 0
Character string
Not performed
Not performed
Not performed
Not performed
Not performed
Canceled
Flashing
Stopped
Stopped
Stopped
Enabled
Enabled
Enabled
0 (OFF)
281
3-2