NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 394

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Format
Function
4-3-21 Re-send Request Command
Command
Format
Response
Function
4-3-22 Error Response
Response
Commands/Responses
Normally, data part is 00, however, it is 10 (31H, 30H) when serial port B is used.
(see below)
• Changes the operation mode of PT from RUN mode to transmit mode by the
• This command can change the PT mode from RUN mode to transmit mode
• After the mode was switched to transmit mode by this command, screen data
• Use this command when the PT is communicating to the host at serial port A. If
• When the PT mode is switched to transmit mode by this command, direct area
• If the PT received this command while the momentary touch switch is being
m
s
None
• The input notify command last sent from the PT is re-sent.
• Requests re-issue of the last input notify command (touch switch input notifica-
c
1
1
instruction from the host.
forcibly even if the setting of Display System Menu was set to Disabled by sys-
tem installer mode.
transmission is possible even if the setting of Screen Memory Protect was set
to Disabled by system installer mode.
you use this command when the PT is communicating to the host at serial port
B, 10 (check sum error) is returned to data part and it is not possible to switch to
the transmit mode.
changing notify command (notification of PT operation status OFF in PT notify
area) will be issued.
pressed, PT issues PT memory changing notify command (notification of cor-
responding word OFF(0)) first and then changes the operation mode to trans-
mit mode.
tion, numeral input notification, character string input notification, direct area
changing notification and PT memory changing notification) issued by the PT.
The PT re-sends the last issued input notify command.
, s
, c
2
2
:
:
:
[ESC]
1B
[ESC]
Check sum present/absent (1 BCD digit)
0 : Absent
1 : Present
Check sum (2 hexadecimal digits)
When m is 0, omit this setting.
Error code (2 BCD digits)
1B
45
E
52
R
52
R
52
R
* *
c1
* *
m
c2
* *
(Sent from Host to PT)
(s1)
(Sent from PT to Host)
* *
* *
s1
(s2)
* *
* *
s2
[CR]
0D
[CR]
Section
0D
385
4-3