AT85C5122D-SISUM Atmel, AT85C5122D-SISUM Datasheet - Page 148

• Manufacturer Part Number: AT85C5122D-SISUM
• Description: RFID Modules & Development Tools 3-5.5V Smart Card Reader
• Manufacturer: Atmel

Specifications of AT85C5122D-SISUM

• Product: RFID Readers

Mode 0 (13-bit Timer)
Mode 1 (16-bit Timer)
148
AT8xC5122/23
INTx#
FCK_Tx
Tx
TMOD reg
GATEx
/6
For normal Timer operation (GATE0= 0), setting TR0 allows TL0 to be incremented by
the selected input. Setting GATE0 and TR0 allows external pin INT0# to control Timer
operation.
Timer 0 overflow (count rolls over from all 1s to all 0s) sets the TF0 flag and generates
an interrupt request.
It is important to stop the Timer/Counter before changing modes.
Mode 0 configures Timer 0 as a 13-bit Timer which is set up as an 8-bit Timer (TH0 reg-
ister) with a modulo-32 prescaler implemented with the lower five bits of the TL0 register
(see Figure 90). The upper three bits of the TL0 register are indeterminate and should
be ignored. Prescaler overflow increments the TH0 register.
Figure 91 gives the overflow period calculation formula.
Figure 90. Timer/Counter x (x= 0 or 1) in Mode 0
Figure 91. Mode 0 Overflow Period Formula
Mode 1 configures Timer 0 as a 16-bit Timer with the TH0 and TL0 registers connected
in a cascade (see Figure 92). The selected input increments the TL0 register.
Figure 93 gives the overflow period calculation formula when in timer mode.
TFx
PER
TMOD reg
C/Tx#
=
0
1
TCON reg
6
TRx
(16384 – (THx, TLx))
F
CK_Tx
(8 bits)
THx
(5 bits)
TLx
Overflow
TCON reg
TFx
4202E–SCR–06/06
Timer x
Interrupt
Request