ADUC7036CCPZ-RL Analog Devices Inc, ADUC7036CCPZ-RL Datasheet - Page 105

• Manufacturer Part Number: ADUC7036CCPZ-RL
• Description: Flash 96k ARM7 Dual 16-Bit ADC LIN I.C.
• Manufacturer: Analog Devices Inc
• Series: MicroConverter® ADuC7xxxr

Specifications of ADUC7036CCPZ-RL

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 20.48MHz
• Connectivity: LIN, SPI, UART/USART
• Peripherals: PSM, Temp Sensor, WDT
• Number Of I /o: 9
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 18 V
• Data Converters: A/D 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 115°C
• Package / Case: 48-VFQFN Exposed Pad, CSP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

UART REGISTER DEFINITIONS
The UART interface consists of the following registers:
•
•
•
•
•
•
•
•
•
•
COMTX, COMRX, and COMDIV0 share the same address
location. COMTX, COMIEN0, and COMRX can be accessed
when Bit 7 in the COMCON0 register is cleared, and
COMDIV0 and COMDIV1 can be accessed when Bit 7 of
COMCON0 is set.
UART Tx Register
Name: COMTX
Address: 0xFFFF0700
Access: Write only
Function: Writing to this 8-bit register transmits data using
the UART.
COMTX: 8-bit transmit register
COMRX: 8-bit receive register
COMDIV0: divisor latch (low byte)
COMDIV1: divisor latch (high byte)
COMCON0: line control register
COMCON1: line control register
COMSTA0: line status register
COMIEN0: interrupt enable register
COMIID0: interrupt identification register
COMDIV2: 16-bit fractional baud divide register
Rev. C | Page 105 of 132
UART Rx Register
Name: COMRX
Address: 0xFFFF0700
Default Value: 0x00
Access: Read only
Function: This 8-bit register is read from to receive data
transmitted using the UART.
UART Divisor Latch Register 0
Name: COMDIV0
Address: 0xFFFF0700
Default Value: 0x00
Access: Read/write
Function: This 8-bit register contains the least significant byte
of the divisor latch that controls the baud rate at which the
UART operates.
UART Divisor Latch Register 1
Name: COMDIV1
Address: 0xFFFF0704
Default Value: 0x00
Access: Read/write
Function: This 8-bit register contains the most significant byte
of the divisor latch that controls the baud rate at which the
UART operates.
ADuC7036