ADUC7036CCPZ-RL Analog Devices Inc, ADUC7036CCPZ-RL Datasheet - Page 128

• Manufacturer Part Number: ADUC7036CCPZ-RL
• Description: Flash 96k ARM7 Dual 16-Bit ADC LIN I.C.
• Manufacturer: Analog Devices Inc
• Series: MicroConverter® ADuC7xxxr

Specifications of ADUC7036CCPZ-RL

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 20.48MHz
• Connectivity: LIN, SPI, UART/USART
• Peripherals: PSM, Temp Sensor, WDT
• Number Of I /o: 9
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 18 V
• Data Converters: A/D 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 115°C
• Package / Case: 48-VFQFN Exposed Pad, CSP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

ADuC7036
PART IDENTIFICATION
Two registers mapped into the MMR space are intended to
allow user code to identify and trace manufacturing lot ID
information, part ID number, silicon mask revision, and kernel
revision. This information is contained in the SYSSER0 and
SYSSER1 MMR (see Table 98 and Table 99 for more information).
In addition, the FEE0ADR MMR contains information at
power-up that can identify the ADuC7036 family member.
For direct traceability, the assembly lot ID, which can be 64 bits
long, is also available. The SYSALI MMR contains the 32-bit
lower half of the assembly lot ID, and the upper half is contained
in the T1LD MMR at power-up.
System Serial ID Register 0
Name: SYSSER0
Address: 0xFFFF0238
Default Value: 0x00000000 (updated by kernel at power-on)
Access: Read/write
Function: At power-on, this 32-bit register holds the value of the original manufacturing lot number from which this specific ADuC7036
unit was manufactured (bottom die only). Used in conjunction with SYSSER1, this lot number allows the full manufacturing history of
this part to be traced (bottom die only).
Table 98. SYSSER0 MMR Bit Designations
Bit
31 to 27
26 to 22
21 to 16
15 to 0
Description
Wafer number. The five bits read from this location give the wafer number (1 to 24) from the wafer fabrication lot ID (from which
this device originated). When used in conjunction with SYSSER0[26:0], it provides individual wafer traceability.
Wafer lot fabrication plant. The five bits read from this location reflect the manufacturing plant associated with this wafer lot.
When this information is used in conjunction with SYSSER0[21:0], it provides wafer lot traceability.
Wafer lot fabrication ID. The six bits read from this location form part of the wafer lot fabrication ID and, when used in
conjunction with SYSSER0[26:22] and SYSSER0[15:0], provide wafer lot traceability.
Wafer lot fabrication ID. These 16 LSBs hold a 16-bit number to be interpreted as the wafer fabrication lot ID number. When
used in conjunction with the value in SYSSER1, that is, the manufacturing lot ID, this number is a unique identifier for the part.
Rev. C | Page 128 of 132
The information contained in SYSSER0, SYSSER1, SYSALI, and
T1LD allows full traceability of each part.
The lot number is part of the branding on the package as shown
in Table 97.
Table 97. Branding Example
Line
Line 1
Line 2
Line 3
Line 4
LFCSP
ADuC7036
BCPZ
A40 # date code
Assembly lot number