CYIL2SM1300AA-GZDC Cypress Semiconductor Corp, CYIL2SM1300AA-GZDC Datasheet - Page 22

• Manufacturer Part Number: CYIL2SM1300AA-GZDC
• Description: IMAGE SENSOR CMOS LUPA-1300-3
• Manufacturer: Cypress Semiconductor Corp
• Type: CMOS Imagingr

Specifications of CYIL2SM1300AA-GZDC

• Package / Case: 168-PGA
• Pixel Size: 14µm x 14µm
• Active Pixel Array: 1280H x 1024V
• Frames Per Second: 500
• Voltage - Supply: 2.5V, 3.3V
• Operating Supply Voltage: 2.5 V
• Maximum Power Dissipation: 1350 mW
• Maximum Operating Temperature: + 70 C
• Supply Current: 80 mA
• Minimum Operating Temperature: 0 C
• Package: 168CuPGA
• Image Size: 1280x1024 Pixels
• Color Sensing: Monochrome
• Operating Temperature: 0 to 70 °C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Reverse Scan
Reverse scanning is supported in the X and Y direction. Line 0 (first line on the output) is the top line in normal mode and the bottom
line in reverse scanning, as shown in
operation is analogous. To enable reverse readout in X and Y, set the seqmode4[6:7] bits. In addition, the Y_start and X_start
addresses must be changed to the new starting address.
Multiple Windows
The sequencer supports the readout of four different windows, randomly positioned over the pixel array. The images are read out
sequentially. That is, window 1 is read out before window 2, even if both windows show some overlap. Next, windows 3 and 4 are
read out. You can configure the number of windows used in the application (one to four).
windows spread over the image array.
Document Number: 001-24599 Rev. *C
Figure 18. Multiple Windows Read from the Same Pixel Array
Figure
Figure 17. Normal and Reverse Scanning in Y
17. As a result, the line numbers always increment. When reverse scanning in X, the
Figure 18
CYIL2SM1300AA
shows how to configure two
Page 22 of 41
[+] Feedback