DRT2-MD32B Omron, DRT2-MD32B Datasheet - Page 282

• Manufacturer Part Number: DRT2-MD32B
• Description: 16In,16Out Horiz MIL Conn NPN
• Manufacturer: Omron

Specifications of DRT2-MD32B

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Node Address
Settings
Baud Rate Setting
Output Hold/Clear
Setting
6-5-2
Input Specifications
Indicators
I/O Status Indicators
Standard Environment-resistive Terminals
Environment-resistive Terminals with 4 Transistor Inputs (IP67):
DRT2-ID04CL (NPN) and DRT2-ID04CL-1 (PNP)
Note
The node address of the Environment-resistive Terminal is set as a decimal,
using the top rotary switch for the ten's digit, and the bottom rotary switch for
the one's digit.
Any node address within the setting range can be used as long as it is not
already set for another node.
Refer to SECTION 5 General-purpose Slaves for details on setting from the
Configurator.
1. Setting the same node address for more than one node will cause a node
2. Always turn OFF the power (including the communications power supply)
The baud rate of the whole system is determined by the baud rate set for the
Master Unit. Setting the baud rate for each Unit is not required.
Use the Configurator to set the output hold/clear settings. The factory setting
is for outputs to be cleared. Refer to SECTION 5 General-purpose Slaves for
setting details.
The I/O status indicator displays and their meanings are shown in the follow-
ing table. Refer to the section following on names of components and func-
tions for details on the location of the I/O status indicators. In the indicator
name “1-A,” the “1” indicates the connector number, and the “A” indicates that
it is an I/O status indicator.
Model
Internal I/O common NPN
Input points
ON voltage
OFF voltage
OFF current
Input current
I/O power supply
voltage
ON delay time
OFF delay time
Number of circuits
1-A
2-A
3-A
4-A
Indicator
address duplication error and communications will not start.
to the Slave before setting.
Item
Yellow
Yellow
Yellow
Yellow
Color
DRT2-ID04CL
4 points
15 V DC min. (between each
input terminal and V)
5 V DC max. (between each
input terminal and V)
1 mA max.
6.0 mA max./point (for 24 V DC), 3.0 mA min./point (for 17 V
DC)
20.4 to 26.4 V DC (24 V DC, −15 to +10%)
1.5 ms max.
1.5 ms max.
4 points with one common
ON
ON
ON
ON
Status
Input 0 is ON.
Input 1 is ON.
Input 2 is ON.
Input 3 is ON.
Specifications
DRT2-ID04CL-1
PNP
15 V DC min. (between each
input terminal and G)
5 V DC max. (between each
input terminal and G)
Meaning
Section 6-5
261