DRT2-MD32B Omron, DRT2-MD32B Datasheet - Page 394

• Manufacturer Part Number: DRT2-MD32B
• Description: 16In,16Out Horiz MIL Conn NPN
• Manufacturer: Omron

Specifications of DRT2-MD32B

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Adjusting the Low Limit
Adjusting the High Limit
Analog Output Terminals
2. Select the Tab Page for the output to be adjusted, and click the Adjust-
3. Output the value that is equivalent to 0% from the Master Unit. Always per-
4. Adjust the analog value that is output from the terminal using the Low Limit
5. To return to the default settings, click the Default Setting Button
6. Close the Adjustment Window, return to the General Tab, click the Down-
7. Click the OK Button and exit the window.
8. Output the value from the Master Unit that is equivalent to the Output Unit’s
9. Adjust the analog value that is output from the terminal using the High Limit
ment Button. (At the same time set the output range again.)
form adjustment with the 0% value.
slide bar, as shown in the following window. Repeat adjustments until the
correct 0% value is output from the output device. After compensation is
completed, click the Fix lower adjusting value Button.
load Button, and then click the Reset Button to reset the Unit.
maximum (100%) value. Adjustment is best performed using the 100% val-
ue, but can be performed using a lower value.
slide bar, as shown in the following window. Repeat adjustments until the
Section 7-5
373