FW82801DB S L66K Intel, FW82801DB S L66K Datasheet - Page 141
FW82801DB S L66K
Manufacturer Part Number
FW82801DB S L66K
Description
Manufacturer
Intel
Datasheet
1.FW82801DB_S_L66K.pdf
(587 pages)
Specifications of FW82801DB S L66K
Lead Free Status / RoHS Status
Supplier Unconfirmed
- Current page: 141 of 587
- Download datasheet (7Mb)
5.12.5.2
5.12.6
5.12.6.1
Intel
®
82801DB ICH4 Datasheet
Transition Rules among S0/Cx and Throttling States
The following priority rules and assumptions apply among the various S0/Cx and throttling states:
Sleep States
Sleep State Overview
The ICH4 directly supports different sleep states (S1–S5), which are entered by setting the
SLP_EN bit, or due to a Power Button press. The entry to the Sleep states are based on several
assumptions:
•
•
•
•
•
•
•
•
•
•
Entry to any S0/Cx state is mutually exclusive with entry to any S1–S5 state. This is because
the processor can only perform one register access at a time and Sleep states have higher
priority than thermal throttling.
When the SLP_EN bit is set (system going to a sleep state (S1–S5), the THTL_EN bit can be
internally treated as being disabled (no throttling while going to sleep state). Note that thermal
throttling (based on THRM# signal) cannot be disabled in an S0 state. However, once the
SLP_EN bit is set, the thermal throttling is shut off (since STPCLK# will be active in S1–S5
states).
If the THTL_EN bit is set, and a Level 2read then occurs, the system should immediately go
and stay in a C2state until a break event occurs. A Level 2read has higher priority than the
software initiated throttling or thermal throttling.
If Thermal Override is causing throttling, and a Level 2read then occurs, the system will stay
in a C2 state until a break event occurs. A Level 2read has higher priority than the Thermal
Override.
After an exit from a C2state (due to a Break event), and if the THTL_EN bit is still set, or if a
Thermal Override is still occurring, the system will continue to throttle STPCLK#. Depending
on the time of break event, the first transition on STPCLK# active can be delayed by up to one
THRM period (1024 PCI clocks=30.72 microseconds).
The Host controller must post Stop-Grant cycles in such a way that the processor gets an
indication of the end of the special cycle prior to the ICH4 observing the Stop-Grant cycle.
This ensures that the STPCLK# signals stays active for a sufficient period after the processor
observes the response phase.
If in the C1 state and the STPCLK# signal goes active, the processor will generate a Stop-
Grant cycle, and the system should go to the C2 state. When STPCLK# goes inactive, it should
return to the C1 state.
Entry to a Cx state is mutually exclusive with entry to a Sleep state. This is because the
processor can only perform one register access at a time. A request to Sleep always has higher
priority than throttling.
Prior to setting the SLP_EN bit, the software turns off processor-controlled throttling. Note
that thermal throttling cannot be disabled, but setting the SLP_EN bit disables thermal
throttling (since S1–S5 sleep state has higher priority).
The G3 state cannot be entered via any software mechanism. The G3 state indicates a
complete loss of power.
Functional Description
141
Related parts for FW82801DB S L66K
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Manufacturer:
Intel
Datasheet:
Part Number:
Description:
Microprocessor: Intel Celeron M Processor 320 and Ultra Low Voltage Intel Celeron M Processor at 600MHz
Manufacturer:
Intel Corporation
Part Number:
Description:
Intel 82550 Fast Ethernet Multifunction PCI/CardBus Controller
Manufacturer:
Intel Corporation
Datasheet:
Part Number:
Description:
Intel StrataFlash memory 32 Mbit. Access speed 120 ns
Manufacturer:
Intel Corporation
Datasheet:
Part Number:
Description:
Intel StrataFlash memory 32 Mbit. Access speed 120 ns
Manufacturer:
Intel Corporation
Datasheet:
Part Number:
Description:
Intel StrataFlash memory 64 Mbit. Access speed 150 ns
Manufacturer:
Intel Corporation
Datasheet:
Part Number:
Description:
Intel StrataFlash memory 32 Mbit. Access speed 100 ns
Manufacturer:
Intel Corporation
Datasheet:
Part Number:
Description:
DA28F640J5A-1505 Volt Intel StrataFlash Memory
Manufacturer:
Intel Corporation
Datasheet:
Part Number:
Description:
5 Volt Intel StrataFlash?? Memory
Manufacturer:
Intel Corporation
Datasheet:
Part Number:
Description:
5 Volt Intel StrataFlash?? Memory
Manufacturer:
Intel Corporation
Part Number:
Description:
Intel 6300ESB I/O Controller Hub
Manufacturer:
Intel Corporation
Datasheet:
Part Number:
Description:
Intel 82801DB I/O Controller Hub (ICH4), Pb-Free SLI
Manufacturer:
Intel Corporation
Datasheet:
Part Number:
Description:
Intel 82801FB I/O Controller Hub (ICH6)
Manufacturer:
Intel Corporation
Datasheet: