AT32UC3A464S Atmel Corporation, AT32UC3A464S Datasheet - Page 20

• Manufacturer Part Number: AT32UC3A464S
• Manufacturer: Atmel Corporation

Specifications of AT32UC3A464S

• Flash (kbytes): 64 Kbytes
• Pin Count: 100
• Max. Operating Frequency: 66 MHz
• Cpu: 32-bit AVR
• Hardware Qtouch Acquisition: No
• Usb Transceiver: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device + OTG
• Spi: 6
• Twi (i2c): 2
• Uart: 4
• Ssc: 1
• Sd / Emmc: 2
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: AES
• Sram (kbytes): 128
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0 to 3.6
• Operating Voltage (vcc): 3.0 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

3.5
3.5.1
3.5.2
32072G–11/2011
Power Considerations
Power Supplies
Voltage Regulator
The AT32UC3A3 has several types of power supply pins:
•
•
•
•
The ground pin GNDCORE is common to VDDCORE and VDDIN. The ground pin for VDDANA
is GNDANA. The ground pins for VDDIO are GNDIO.
Refer to Electrical Characteristics chapter for power consumption on the various supply pins.
The AT32UC3A3 embeds a voltage regulator that converts from 3.3V to 1.8V with a load of up
to 100 mA. The regulator takes its input voltage from VDDIN, and supplies the output voltage on
VDDCORE and powers the core, memories and peripherals.
Adequate output supply decoupling is mandatory for VDDCORE to reduce ripple and avoid
oscillations.
The best way to achieve this is to use two capacitors in parallel between VDDCORE and
GNDCORE:
Adequate input supply decoupling is mandatory for VDDIN in order to improve startup stability
and reduce source voltage drop.
The input decoupling capacitor should be placed close to the chip, e.g., two capacitors can be
used in parallel (1nF NPO and 4.7µF X7R).
For decoupling recommendations for VDDIO and VDDANA please refer to the Schematic
checklist.
• One external 470pF (or 1nF) NPO capacitor (C
• One external 2.2µF (or 3.3µF) X7R capacitor (C
VDDIO: Powers I/O lines. Voltage is 3.3V nominal
VDDANA: Powers the ADC. Voltage is 3.3V nominal
VDDIN: Input voltage for the voltage regulator. Voltage is 3.3V nominal
VDDCORE: Output voltage from regulator for filtering purpose and provides the supply to the
core, memories, and peripherals. Voltage is 1.8V nominal
chip as possible.
1.8V
3.3V
C
C
OUT2
IN2
C
C
IN1
OUT1
OUT1
OUT2
) should be connected as close to the
VDDCORE
).
VDDIN
Regulator
1.8V
20