AT32UC3A464S Atmel Corporation, AT32UC3A464S Datasheet - Page 316

• Manufacturer Part Number: AT32UC3A464S
• Manufacturer: Atmel Corporation

Specifications of AT32UC3A464S

• Flash (kbytes): 64 Kbytes
• Pin Count: 100
• Max. Operating Frequency: 66 MHz
• Cpu: 32-bit AVR
• Hardware Qtouch Acquisition: No
• Usb Transceiver: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device + OTG
• Spi: 6
• Twi (i2c): 2
• Uart: 4
• Ssc: 1
• Sd / Emmc: 2
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: AES
• Sram (kbytes): 128
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0 to 3.6
• Operating Voltage (vcc): 3.0 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

19.3
19.4
19.4.1
19.4.2
19.4.3
19.4.4
19.4.5
32072G–11/2011
Block Diagram
Product Dependencies
I/O Lines
Power Management
Clocks
Interrupts
Peripherals
Figure 19-1. DMA Controller (DMACA) Block Diagram
In order to use this module, other parts of the system must be configured correctly, as described
below.
The pins used for interfacing the compliant external devices may be multiplexed with GPIO lines.
The user must first program the GPIO controller to assign the DMACA pins to their peripheral
functions.
To prevent bus errors the DMACA operation must be terminated before entering sleep mode.
The CLK_DMACA to the DMACA is generated by the Power Manager (PM). Before using the
DMACA, the user must ensure that the DMACA clock is enabled in the power manager.
The DMACA interface has an interrupt line connected to the Interrupt Controller. Handling the
DMACA interrupt requires programming the interrupt controller before configuring the DMACA.
Both the source peripheral and the destination peripheral must be set up correctly prior to the
DMA transfer.
HSB Master
HSB Slave
HSB Master
HSB Slave
I/F
I/F
DMA Controller
CFG
SRC
FSM
Channel 0
FIFO
Channel 1
FSM
DST
Generator
Interrupt
irq_dma
316