11274-001 AMI Semiconductor, Inc., 11274-001 Datasheet - Page 26

• Manufacturer Part Number: 11274-001
• Description: Logic and Timing, Programmable Line Lock Clock Generator IC, Tape and Reel
• Manufacturer: AMI Semiconductor, Inc.

FS6131-01
FS6131-01
FS6131-01
FS6131-01
Programmable Line Lock Clock Generator IC
Programmable Line Lock Clock Generator IC
Programmable Line Lock Clock Generator IC
Programmable Line Lock Clock Generator IC
10.1
10.2
10.3
1. Run the self-expanding exe file to unzip the com-
2. Run the setup.exe file to install the programming
Figure 20: Opening Screen
Demonstration board
Interface cable (DB25 to 6-pin connector)
Data sheet
Programming software
PC running MS Windows 3.1x or 95/98 with an ac-
cessible parallel (LPT1) port. Software also runs on
Windows NT in a calculation mode only.
2.0MB available space on hard drive C:
pressed demo files to a directory of your choice.
software.
Demo Kit Contents
Requirements
Board Setup and Software
Installation Instructions
26
3. Connect a +5 Volt power supply to the board: RED =
4. Remove all software keys from the computer parallel
5. Connect the clock outputs to the target application
10.4
appear stating: “This version of the demo program cannot
communicate with the FS6131 hardware when running
on a Windows NT operating system. Do you want to
continue anyway, using just the calculation features of
this program?” Clicking OK starts the program for calcu-
lation only.
The opening screen is shown in Figure 20.
+5V, BLACK = ground.
port. Connect the supplied interface cable to the par-
allel port (DB25 connector) and to the demo board (6-
pin connector). Make sure the cable is facing away
from the board. Pin 1 is the red wire per Figure 23.
board with a twisted-pair cable.
Run the fs6131.exe program. Note that the
parallel port can not be accessed if your machine
is running Windows NT . A warning message will
Demo Program Operation