w83977atg Winbond Electronics Corp America, w83977atg Datasheet - Page 163

• Manufacturer Part Number: w83977atg
• Description: W83877tf Plus Kbc, Gp I/o, Wake-up, Fir, Cir, Pb-free
• Manufacturer: Winbond Electronics Corp America

CRF1 (Default 0x00)
*Note: If the logical device's activate bit is not set then bit 0 and 1 have no effect.
14.11 Logical Device A (ACPI)
CR30 (Default 0x00)
CR60, CR 61 (Default 0x00, 0x00)
CR62, CR 63 (Default 0x00, 0x00)
CR64, CR 65 (Default 0x00, 0x00)
CR70 (Default 0x00)
CRE0 (Default 0x00)
Bit 7 - 3
Bit 2
Bit 1
Bit 0
Bit 7 - 1
Bit 0
Bit 7 - 4
Bit 3 - 0
Bit 7
Bit 6
These two registers select PM1 register block base address [0x100:0xFFF] on 16-byte boundary.
These two registers select GPE0 register block base address [0x100:0xFFF] on 4-byte boundary.
These two registers select GPE1 register block base address [0x100:0xFFF] on 4-byte boundary.
: Reserved
: SERIRQ
= 0
= 1
= 1
= 0
= 1
= 0
: Reserved.
= 1
= 0
: Reserved.
: These bits select IRQ resource for SCI .
: DIS-PANSWIN. Disable panel switch input to turn system power supply on.
= 0
= 1
: ENKBWAKEUP. Enable Keyboard to wake-up system via PANSWOUT .
= 0
= 1
The IRQ system is in normal mode.
The IRQ system is in serial IRQ mode.
Enable GP33 General Purpose Address Decode.
Disable GP33 General Purpose Address Decode.
Enable GP32 General Purpose Address Decode.
Disable GP32 General Purpose Address Decode.
Activates the logical device.
Logical device is inactive.
Disable Keyboard wake-up function.
Enable Keyboard wake-up function.
PANSWIN is wire-ANDed and connected to PANSWOUT .
PANSWIN is blocked and can not affect PANSWOUT .
- 155 -
W83977ATF/W83977ATG
Publication Release Date: May 2006
Revision 0.6