PCF8576DT/S400/2,1 NXP Semiconductors, PCF8576DT/S400/2,1 Datasheet - Page 19

no-image

PCF8576DT/S400/2,1

Manufacturer Part Number
PCF8576DT/S400/2,1
Description
LCD Drivers 2.64KHz 50mA 400mW
Manufacturer
NXP Semiconductors
Datasheet

Specifications of PCF8576DT/S400/2,1

Rohs
yes
Maximum Clock Frequency
2.64 kHz
Operating Supply Voltage
1.8 V to 5.5 V
Package / Case
TSSOP-56
Maximum Power Dissipation
400 mW
Maximum Supply Current
50 mA
Mounting Style
SMD/SMT
Factory Pack Quantity
2000
NXP Semiconductors
PCF8576D
Product data sheet
in pairs, triples, or quadruples. To illustrate the filling order, an example of a 7-segment
display showing all drive modes is given in
depicted applies equally to other LCD types.
The following applies to
In static drive mode the eight transmitted data bits are placed into row 0 as one byte.
In 1:2 multiplex drive mode the eight transmitted data bits are placed in pairs into
row 0 and 1 as two successive 4-bit RAM words.
In 1:3 multiplex drive mode the eight bits are placed in triples into row 0, 1, and 2 as
three successive 3-bit RAM words, with bit 3 of the third address left unchanged. It is
not recommended to use this bit in a display because of the difficult addressing. This
last bit may, if necessary, be controlled by an additional transfer to this address, but
care should be taken to avoid overwriting adjacent data because always full bytes are
transmitted (see
In 1:4 multiplex drive mode, the eight transmitted data bits are placed in quadruples
into row 0, 1, 2, and 3 as two successive 4-bit RAM words.
All information provided in this document is subject to legal disclaimers.
Section
Rev. 13 — 10 May 2012
Figure
7.10.3).
13:
Universal LCD driver for low multiplex rates
Figure
13; the RAM filling organization
PCF8576D
© NXP B.V. 2012. All rights reserved.
19 of 56

Related parts for PCF8576DT/S400/2,1