ZLF645S0Q2032G Maxim Integrated, ZLF645S0Q2032G Datasheet - Page 104

• Manufacturer Part Number: ZLF645S0Q2032G
• Description: 8-bit Microcontrollers - MCU Crimzon Flash Infrared MCU
• Manufacturer: Maxim Integrated

Specifications of ZLF645S0Q2032G

• Core: Z8
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 8 MHz
• Program Memory Size: 32 KB
• Data Ram Size: 1 KB
• On-chip Adc: No
• Operating Supply Voltage: 2 V to 3.6 V
• Package / Case: QFN-EP-20
• Mounting Style: SMD/SMT
• Interface Type: UART
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Number Of Programmable I/os: 5
• Number Of Timers: 2 x 8 bit, 1 x 16 bit
• On-chip Dac: No
• Processor Series: ZLF645
• Program Memory Type: Flash
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 2 V

19-4572; Rev 0; 4/09
Bit Position
[6]
[5]
[4]
[3] 
[2]
[1]
[0] 
UART Control Register
Note:
The UART Control register controls the UART. In addition to setting bit 5, you must also
set appropriate bit in the Interrupt Mask register (see
This register is not reset after a Stop Mode Recovery.
Value
Read
Write
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Description
Parity Error —Set when a parity error occurs; cleared when URDATA is read.
No parity error occurs.
Parity error occurs.
Overrun Error—Set when an overrun error occurs; cleared when
URDATA is read.
No overrun error occurs.
Overrun error occurs.
Framing Error —Set when a framing error occurs; cleared when
URDATA is read.
No framing error occurs.
Framing error occurs.
Break —Set when a break is detected; cleared when URDATA is read.
No break occurs.
Break occurs.
Transmit Data Status —Set when the UART is ready to transmit; cleared when
TRDATA is written.
Do not write to the UART Transmit Data register.
UART Transmit Data register ready to receive additional data.
Transmit Completion Status
Data is currently transmitting.
Transmission is complete.
Noise Filter —Detects noise during data reception.
No noise detected.
Noise detected.
Turn off noise filter.
Turn on noise filter.
Table 65
ZLF645 Series Flash MCUs
on page 133).
Product Specification
UART Control Register
96