ZLF645S0Q2032G Maxim Integrated, ZLF645S0Q2032G Datasheet - Page 31

• Manufacturer Part Number: ZLF645S0Q2032G
• Description: 8-bit Microcontrollers - MCU Crimzon Flash Infrared MCU
• Manufacturer: Maxim Integrated

Specifications of ZLF645S0Q2032G

• Core: Z8
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 8 MHz
• Program Memory Size: 32 KB
• Data Ram Size: 1 KB
• On-chip Adc: No
• Operating Supply Voltage: 2 V to 3.6 V
• Package / Case: QFN-EP-20
• Mounting Style: SMD/SMT
• Interface Type: UART
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Number Of Programmable I/os: 5
• Number Of Timers: 2 x 8 bit, 1 x 16 bit
• On-chip Dac: No
• Processor Series: ZLF645
• Program Memory Type: Flash
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 2 V

ZLF645 Series Flash MCUs
Product Specification
23
Port 3
Port 3 is an 8-bit CMOS-compatible I/O port. Port 3 consists of four fixed inputs
(P33:P30), three fixed outputs (P37:P36:P35), and one multi-functioned pin (P34) that can
function as an output only or as a bidirectional open-drain I/O depending on whether the
ZLF645 MCU is in ICP mode.
P30, P31, P32, and P33 are standard CMOS inputs with option enabled pull-up transistors
and can be configured under software as interrupts, as received data input to the UART
block, as input to comparator circuits, or as input to the IR learning amplifier.
P37, P36, and P35 are push/pull outputs and can be configured as outputs from
counter/timers and/or comparator circuits.
During the ZLF645’s POR time, P34 is configured as an input pin with pull-up enabled. If
after completing it’s POR period, the ZLF645 has not detected this pin LOW and been put
into ICP mode, this pin will revert back to being a push/pull output only. For more details
on the function of pin P34, see
ICP Interface
on page 53.
PS026408-1208
Port 3