C8051F045R Silicon Labs, C8051F045R Datasheet - Page 94

• Manufacturer Part Number: C8051F045R
• Description: 8-bit Microcontrollers - MCU 25 MIPS 64KB 10ADC
• Manufacturer: Silicon Labs

Specifications of C8051F045R

• Product Category: 8-bit Microcontrollers - MCU
• Core: 8051
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 64 KB
• Data Ram Size: 4.25 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 2.7 V to 3.6 V
• Package / Case: TQFP-64
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 13
• Data Rom Size: 64 KB
• Interface Type: CAN, SMBus, SPI, UART
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 32
• Number Of Timers: 16 bit
• Processor Series: C8051
• Program Memory Type: Flash
• Factory Pack Quantity: 500
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 2.7 V

C8051F040/1/2/3/4/5/6/7
7.2.3. Settling Time Requirements
A minimum tracking time is required before an accurate conversion can be performed. This tracking time is
determined by the ADC2 MUX resistance, the ADC2 sampling capacitance, any external source resis-
tance, and the accuracy required for the conversion. Figure 7.3 shows the equivalent ADC2 input circuit.
The required ADC2 settling time for a given settling accuracy (SA) may be approximated by Equation 7.1.
Note: An absolute minimum settling time of 0.8 µs required after any MUX selection. Note that in low-
power tracking mode, three SAR2 clocks are used for tracking at the start of every conversion. For most
applications, these three SAR2 clocks will meet the tracking requirements.
Where:
SA is the settling accuracy, given as a fraction of an LSB (for example, 0.25 to settle within 1/4 LSB)
t is the required settling time in seconds
R
n is the ADC resolution in bits (8).
94
TOTAL
is the sum of the ADC2 MUX resistance and any external source resistance.
Equation 7.1. ADC2 Settling Time Requirements
Figure 7.3. ADC2 Equivalent Input Circuit
AIN2.x
t
=
RC
ln
MUX Select
Input


= R
------ -
SA
2
n
MUX


Rev. 1.5

R
* C
MUX
R
SAMPLE
TOTAL
= 5k
C
SAMPLE
C
SAMPLE
= 10pF