P0304 Terasic Technologies Inc, P0304 Datasheet - Page 12

• Manufacturer Part Number: P0304
• Description: DE2-70 CALL FOR ACADEMIC PRICING
• Manufacturer: Terasic Technologies Inc
• Type: FPGAr

Specifications of P0304

• Contents: DE2-70 Board, Power Supply, Cables, Plastic cover and software
• For Use With/related Products: Cyclone II 2C70
• For Use With: P0033 - BOARD ADAPTER HSMC TO GPIOP0006 - BOARD ADAPTER THDB-SUMP0001 - MODULE DIGITAL CAMERA 5MP (D5M)P0307 - KIT DEV 4.3" LCD TOUCH PANEL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DE2-70

Serial ports
IrDA transceiver
Two 40-pin expansion headers
2.3 Power-up the DE2-70 Board
The DE2-70 board comes with a preloaded configuration bit stream to demonstrate some features of
the board. This bit stream also allows users to see quickly if the board is working properly. To
power-up the board perform the following steps:
 One RS-232 port
 One PS/2 port
 DB-9 serial connector for the RS-232 port
 PS/2 connector for connecting a PS2 mouse or keyboard to the DE2-70 board
 Contains a 115.2-kb/s infrared transceiver
 32 mA LED drive current
 Integrated EMI shield
 IEC825-1 Class 1 eye safe
 Edge detection input
 72 Cyclone II I/O pins, as well as 8 power and ground lines, are brought out to two 40-pin
 40-pin header is designed to accept a standard 40-pin ribbon cable used for IDE hard drives
 Diode and resistor protection is provided
1. Connect the provided USB cable from the host computer to the USB Blaster connector on
2. Connect the 12V adapter to the DE2-70 board
3. Connect a VGA monitor to the VGA port on the DE2-70 board
4. Connect your headset to the Line-out audio port on the DE2-70 board
5. Turn the RUN/PROG switch on the left edge of the DE2-70 board to RUN position; the
6. Turn the power on by pressing the ON/OFF switch on the DE2-70 board
expansion connectors
the DE2-70 board. For communication between the host and the DE2-70 board, it is
necessary to install the Altera USB Blaster driver software. If this driver is not already
installed on the host computer, it can be installed as explained in the tutorial Getting
Started with Altera's DE2-70 Board. This tutorial is available in the directory
DE2_70_tutorials on the DE2-70 System CD-ROM.
PROG position is used only for the AS Mode programming
9
DE2-70 User Manual