LAN9313I-NZW SMSC, LAN9313I-NZW Datasheet - Page 46

• Manufacturer Part Number: LAN9313I-NZW
• Description: Ethernet ICs Three Port 10/100 Ethernet Switch
• Manufacturer: SMSC
• Type: Three Port Managed Ethernet Switchr

Specifications of LAN9313I-NZW

• Ethernet Connection Type: 10 Base-T, 100 Base-TX
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Product: Ethernet Switches
• Number Of Transceivers: 1
• Standard Supported: 802.3, 802.3u
• Data Rate: 10 Mbps, 100 Mbps
• Supply Voltage (max): 3.3 V
• Supply Voltage (min): 0 V
• Supply Current (max): 155 mA, 270 mA
• Maximum Operating Temperature: + 70 C
• Package / Case: TQFP-100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Revision 1.7 (06-29-10)
STRAP NAME
auto_mdix_strap_1
manual_mdix_strap_1
autoneg_strap_1
speed_strap_1
Table 4.2 Soft-Strap Configuration Strap Definitions (continued)
DESCRIPTION
Port 1 Auto-MDIX Enable Strap: Configures the default
value for the Auto-MDIX functionality on Port 1 when the
AMDIXCTL bit in the
Indication Register
(PHY_SPECIAL_CONTROL_STAT_IND_x)
When configured low, Auto-MDIX is disabled. When
configured high, Auto-MDIX is enabled.
Note:
Port 1 Manual MDIX Strap: Configures MDI(0) or MDIX(1)
for Port 1 when the auto_mdix_strap_1 is low and the
AMDIXCTL bit of the
Indication Register
(PHY_SPECIAL_CONTROL_STAT_IND_x)
Port 1 Auto Negotiation Enable Strap: Configures the
default value for the
in the PHY_BASIC_CTRL_1 register (See
Section
disabled. When configured high, auto-negotiation is
enabled.
This strap also affects the default value of the following bits:
Refer to the respective register definition sections for
additional information.
Port 1 Speed Select Strap: Configures the default value
for the
the PHY_BASIC_CTRL_1 register (See
When configured low, 10 Mbps is selected. When
configured high, 100 Mbps is selected.
This strap also affects the default value of the following bits:
Refer to the respective register definition sections for
additional information.
PHY_SPEED_SEL_LSB and PHY_DUPLEX bits of the
Port x PHY Basic Control Register
(PHY_BASIC_CONTROL_x)
10BASE-T Full Duplex (bit 6) and 10BASE-T Half Duplex
(bit 5) bits of the
Advertisement Register (PHY_AN_ADV_x)
MODE[2:0] bits of the
(PHY_SPECIAL_MODES_x)
PHY_SPEED_SEL_LSB bit of the
Control Register (PHY_BASIC_CONTROL_x)
10BASE-T Full Duplex (bit 6) and 10BASE-T Half Duplex
(bit 5) bits of the
Advertisement Register (PHY_AN_ADV_x)
MODE[2:0] bits of the
(PHY_SPECIAL_MODES_x)
Speed Select LSB (PHY_SPEED_SEL_LSB)
13.2.2.1). When configured low, auto-negotiation is
If AMDIXCTL is set, this strap had no effect.
DATASHEET
Port x PHY Auto-Negotiation
Port x PHY Auto-Negotiation
Auto-Negotiation (PHY_AN)
Port x PHY Special Control/Status
Port x PHY Special Control/Status
Port x PHY Special Modes Register
Port x PHY Special Modes Register
46
Port x PHY Basic
Section
Three Port 10/100 Managed Ethernet Switch with MII
is cleared.
is cleared.
13.2.2.1).
enable bit
bit in
SMSC LAN9313/LAN9313i
PIN / DEFAULT
VALUE
AUTO_MDIX_1
0b
AUTO_NEG_1
SPEED_1
Datasheet