82V2608BB IDT, Integrated Device Technology Inc, 82V2608BB Datasheet - Page 47

• Manufacturer Part Number: 82V2608BB
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of 82V2608BB

• Utopia Level: Level 2
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (max): 3.63V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Package Type: BGA
• Pin Count: 208
• Mounting: Surface Mount
• Lead Free Status / Rohs Status: Not Compliant

Table-28 ConfigUNILink Command (Encoding: 0DH)
Command Parameters
Command Reply
IDT82V2608
PROGRAMMING INFORMATION for IMAOS08
Byte Sequence
Byte Sequence
1
2
3
4
5
6
1
Parameter Name
link line interface
link line interface
Link physical #
Tx Utopia Port
Rx Utopia Port
Reply Name
Work Mode
Channel ID
Channel ID
clock
Ack
Ack
1
1
0: OK;
1: The link is busy or Channel ID is over 15;
Others: Internal error. The chip should be reset.
Default
Link physical #
1FH
1FH
0FH
NA
NA
0H
2
0~7
The internally used channel for this UNI link. Each Channel ID is unique and should not be equal to any
Group ID that has been assigned. It is recommended that Channel ID be used from 7 down to 0. As a
Group ID is from 0 to 3, it is better for a Channel ID to be from 4 to 7 unless all the values from 4 to 7 are
taken.
0~7
The physical link to be used in UNI mode.
Note: If the value exceeds 7, the performance cannot be guaranteed.
0~30
The Utopia port address for data transmit. Port 31 is reserved and should not be used.
Note: The upper 3 bits are Don’t Care.
0~30
The Utopia port address for data receive. Port 31 is reserved and should not be used.
Note: The upper 3 bits are Don’t Care.
Mode0~mode15
Line interface Work Mode for this link.
Note: If the value exceeds 15, IMAOS will work improperly.
0: Common Clock Mode;
1: Independent Clock Mode
Line interface clock input mode. The line interface mode7~mode10 and mode14~mode15 cannot be
used in Independent Clock Mode.
Note: IMAOS does not check this value. Value exceeding 1 will cause wrong configuration.
Tx Utopia Port
3
47
Rx Utopia Port
4
Description
Description
link line interface
Work Mode
5
Inverse Multiplexing for ATM
link line interface
December 4, 2006
clock
6