CYUSB3011-BZXC CYPRESS [Cypress Semiconductor], CYUSB3011-BZXC Datasheet - Page 4

• Manufacturer Part Number: CYUSB3011-BZXC
• Manufacturer: CYPRESS [Cypress Semiconductor]

USB Interface
FX3 complies with the following specifications and supports the
following features:
■
■
■
■
■
■
■
Note When the USB port is not in use, disable the PHY and
transceiver to save power.
Document Number: 001-52136 Rev. *L
Supports USB peripheral functionality compliant with USB 3.0
Specification Revision 1.0 and is also backward compatible
with the USB 2.0 Specification.
Complies with OTG Supplement Revision 2.0. It supports
High-Speed, Full-Speed, and Low-Speed OTG dual-role device
capability. As a peripheral, FX3 is capable of SuperSpeed,
High-Speed, and Full-Speed. As a host, it is capable of
High-Speed, Full-Speed, and Low-Speed.
Supports Carkit Pass-Through UART functionality on USB
D+/D– lines based on the CEA-936A specification.
Supports up to 16 IN and 16 OUT endpoints.
Supports the USB 3.0 Streams feature. It also supports USB
Attached SCSI (UAS) device-class to optimize mass-storage
access performance.
As a USB peripheral, FX3 supports UAS, USB Video Class
(UVC), Mass Storage Class (MSC), and Media Transfer
Protocol (MTP) USB peripheral classes. As a USB peripheral,
all other device classes are supported only in pass-through
mode when handled entirely by a host processor external to
the device.
As an OTG host, FX3 supports MSC and HID device classes.
*
(Example: Image sensor)
External Slave Device
CLKIN pin instead of a crystal input
A clock input may be provided on the
Figure 2. EZ-USB FX3 as Main Processor
GPIF II
(ARM9 Core)
EZ-USB FX3
Figure 3. USB Interface Signals
OTG
FX3 is compliant with the OTG Specification Revision 2.0. In
OTG mode, FX3 supports both A and B device modes and
supports Control, Interrupt, Bulk, and Isochronous data
transfers.
FX3 requires an external charge pump (either standalone or
integrated into a PMIC) to power VBUS in the OTG A-device
mode.
The Target Peripheral List for OTG host implementation consists
of MSC- and HID-class devices.
FX3 does not support Attach Detection Protocol (ADP).
EEPROM
Crystal *
I2C
OTG_ID
VBATT
SSRX-
SSRX+
VBUS
SSTX-
SSTX+
D-
D+
EZ-USB FX3
Port
USB
USB Host
CYUSB301X
Page 4 of 40