PIC18F25J11-I/ML Microchip Technology, PIC18F25J11-I/ML Datasheet - Page 260

• Manufacturer Part Number: PIC18F25J11-I/ML
• Description: IC PIC MCU FLASH 32K 2V 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F25J11-I/ML

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC18
• No. Of I/o's: 16
• Ram Memory Size: 3.6875KB
• Cpu Speed: 48MHz
• No. Of Timers: 5
• Interface: EUSART, I2C, SPI
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3776 B
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183022, DM183032, DV164136, MA180023
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18F46J11 FAMILY
REGISTER 17-3:
17.5.7
In Single Output mode, pulse steering allows any of the
PWM pins to be the modulated signal. Additionally, the
same PWM signal can simultaneously be available on
multiple pins.
Once
(CCPxM<3:2> = 11 and PxM<1:0> = 00 of the
CCPxCON register), the user firmware can bring out
the same PWM signal to one, two, three or four output
pins by setting the appropriate STR<D:A> bits of the
PSTRxCON register, as provided in Table 17-4.
DS39932C-page 260
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6-0
Note:
PxRSEN
R/W-0
the
PULSE STEERING MODE
The associated TRIS bits must be set to
output (‘0’) to enable the pin output driver
in order to see the PWM signal on the pin.
Single
PxRSEN: PWM Restart Enable bit
1 = Upon auto-shutdown, the ECCPxASE bit clears automatically once the shutdown event goes
0 = Upon auto-shutdown, ECCPxASE must be cleared by software to restart the PWM
PxDC<6:0>: PWM Delay Count bits
PxDCn = Number of F
PxDC6
R/W-0
away; the PWM restarts automatically
ECCPxDEL: ENHANCED PWM CONTROL REGISTER (ACCESS FBDh/FB7h)
Output
should transition active and the actual time it transitions active.
W = Writable bit
‘1’ = Bit is set
mode
PxDC5
R/W-0
OSC
is
/4 (4 * T
selected
PxDC4
R/W-0
OSC
) cycles between the scheduled time when a PWM signal
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PxDC3
R/W-0
While the PWM Steering mode is active, the
CCPxM<1:0> bits of the CCPxCON register select the
PWM output polarity for the Px<D:A> pins.
The PWM auto-shutdown operation also applies to
PWM Steering mode as described in Section 17.5.4
“Enhanced
auto-shutdown event will only affect pins that have
PWM outputs enabled.
PxDC2
R/W-0
PWM
Auto-shutdown
© 2009 Microchip Technology Inc.
x = Bit is unknown
PxDC1
R/W-0
mode”.
PxDC0
R/W-0
bit 0
An