MCL908QY2CDTE Freescale Semiconductor, MCL908QY2CDTE Datasheet - Page 49

• Manufacturer Part Number: MCL908QY2CDTE
• Description: IC MCU 8BIT 1.5K FLASH 16-TSSOP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MCL908QY2CDTE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 2MHz
• Peripherals: LVD, POR, PWM
• Number Of I /o: 13
• Program Memory Size: 1.5KB (1.5K x 8)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 3.6 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 16-TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

4.4 Wait Mode
The AWU module remains inactive in wait mode.
4.5 Stop Mode
When the AWU module is enabled (AWUIE = 1 in the keyboard interrupt enable register) it is activated
automatically upon entering stop mode. Clearing the IMASKK bit in the keyboard status and control
register enables keyboard interrupt requests to bring the MCU out of stop mode. The AWU counters start
from ‘0’ each time stop mode is entered.
4.6 Input/Output Registers
The AWU shares registers with the keyboard interrupt (KBI) module and the port A I/O module. The
following I/O registers control and monitor operation of the AWU:
4.6.1 Port A I/O Register
The port A data register (PTA) contains a data latch for the state of the AWU interrupt request, in addition
to the data latches for port A.
AWUL — Auto Wakeup Latch
Freescale Semiconductor
•
•
•
This is a read-only bit which has the value of the auto wakeup interrupt request latch. The wakeup
request signal is generated internally. There is no PTA6 port or any of the associated bits such as
PTA6 data direction or pullup bits.
1 = Auto wakeup interrupt request is pending
0 = Auto wakeup interrupt request is not pending
Port A data register (PTA)
Keyboard interrupt status and control register (KBSCR)
Keyboard interrupt enable register (KBIER)
Address: $0000
PTA5–PTA0 bits are not used in conjuction with the auto wakeup feature.
To see a description of these bits, see
Reset:
Read:
Write:
Bit 7
0
0
= Unimplemented
Figure 4-2. Port A Data Register (PTA)
MC68HLC908QY/QT Family Data Sheet, Rev. 3
AWUL
6
0
PTA5
5
NOTE
PTA4
4
12.2.1 Port A Data
Unaffected by reset
PTA3
3
PTA2
2
Register.
PTA1
1
PTA0
Bit 0
Wait Mode
49