AT89C5132-ROTIL Atmel, AT89C5132-ROTIL Datasheet - Page 96

• Manufacturer Part Number: AT89C5132-ROTIL
• Description: IC 8051 MCU FLASH 64K USB 80TQFP
• Manufacturer: Atmel
• Series: AT89C513xr

Specifications of AT89C5132-ROTIL

• Core Processor: C52X2
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: IDE/ATAPI, I²C, MMC, PCM, SPI, UART/USART, USB
• Peripherals: I²S, POR, WDT
• Number Of I /o: 44
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 2.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.3 V
• Data Converters: A/D 2x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TQFP, 80-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Figure 16-19. Data Block Reception Flows
16.6.5
16.7
16.7.1
96
Interrupt
AT89C5132
Flow Control
Description
read 8 data from MMDAT
a. Polling Mode
Start Transmission
F1EI or F2EI = 1?
FIFO Reading
No More Data
Data Block
To Receive?
Reception
DATEN = 1
DATEN = 0
FIFO Full?
To allow transfer at high speed without taking care of CPU oscillator frequency, the FLOWC bit
in MMCON2 allows control of the data flow in both transmission and reception.
During transmission, setting the FLOWC bit has the following effects:
•
•
During reception, setting the FLOWC bit has the following effects:
•
•
As soon as the clock is stopped, the MMC bus is frozen and remains in its state until the clock is
restored by writing or reading data in MMDAT.
As shown in Figure 16-20, the MMC controller implements eight interrupt sources reported in
MCBI, EORI, EOCI, EOFI, F2FI, F1FI, and F2EI flags in MMCINT register. These flags were
detailed in the previous sections.
All of these sources are maskable separately using MCBM, EORM, EOCM, EOFM, F2FM,
F1FM, and F2EM mask bits, respectively, in MMMSK register.
MMCLK is stopped when both FIFOs become empty: F1EI and F2EI set.
MMCLK is restarted when one of the FIFOs becomes full: F1EI or F2EI cleared.
MMCLK is stopped when both FIFOs become full: F1FI and F2FI set.
MMCLK is restarted when one of the FIFOs becomes empty: F1FI or F2FI cleared.
Unmask FIFOs Full
Start Transmission
Initialization
Data Block
DATEN = 1
DATEN = 0
F1FM = 0
F2FM = 0
read 8 data from MMDAT
b. Interrupt Mode
F1EI or F2EI = 1?
Reception ISR
Mask FIFOs Full
FIFO Reading
No More Data
Data Block
To Receive?
FIFO Full?
F1FM = 1
F2FM = 1
4173E–USB–09/07