ATAM893T-TKS Atmel, ATAM893T-TKS Datasheet - Page 17

• Manufacturer Part Number: ATAM893T-TKS
• Description: IC MON TIRE-PRESS ATARX9X SER
• Manufacturer: Atmel
• Series: MARC4r

Specifications of ATAM893T-TKS

• Core Processor: MARC4
• Core Size: 4-Bit
• Speed: 4MHz
• Connectivity: SSI (2-Wire, 3 Wire)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: EEPROM
• Eeprom Size: 64 x 16
• Ram Size: 256 x 4
• Voltage - Supply (vcc/vdd): 1.8 V ~ 6.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 20-SOIC (5.3mm Width), 20-SO, 20-SOEIAJ
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Data Converters: -

4.5.2
4.5.2.1
4.5.2.2
4680C–4BMCU–01/05
Oscillator Circuits and External Clock Input Stage
RC-oscillator 1 Fully Integrated
External Input Clock
The ATAM893-D series consists of four different internal oscillators: two RC-oscillators, one 4-
MHz crystal oscillator, one 32-kHz crystal oscillator and one external clock input stage.
For timing insensitive applications, it is possible to use the fully integrated RC-oscillator 1. It
operates without any external components and saves additional costs. The RC-oscillator 1 cen-
ter frequency tolerance is better than 50% over the full temperature and voltage range. The
basic center frequency of the RC-oscillator 1 is f
default after power-on reset.
Figure 4-13. RC-oscillator 1
The OSC1 or OSC2 can be driven by an external clock source provided it meets the specified
duty cycle, rise and fall times and input levels. Additionally, the external clock stage contains a
supervisory circuit for the input clock. The supervisor function is controlled via the OS1, OS0 bit
in the SC register and the CCS bit in the CM register. If the external input clock is missing for
more than 1 ms and CCS = 0 is set in the CM register, the supervisory circuit generates a hard-
ware reset.
Figure 4-14. External Input Clock
Clock
Clock
Ext.
Ext.
or
OSC1
OSC2
RC-oscillator 1
Control
Ext. input clock
ExIn
Clock monitor
RcOut1
Stop
O
ExOut
Stop
4.0 MHz. The RC oscillator 1 is selected by
Osc-Stop
RcOut1
Osc-Stop
RcOut1
CCS
Res
ATAM893-D
17