ATMEGA6490-16AI Atmel, ATMEGA6490-16AI Datasheet - Page 18

• Manufacturer Part Number: ATMEGA6490-16AI
• Description: IC AVR MCU FLASH 64K 5V 100TQFP
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA6490-16AI

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SPI, UART/USART, USI
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• For Use With: ATSTK600-TQFP100 - STK600 SOCKET/ADAPTER 100-TQFPATSTK504 - STARTER KIT AVR EXP MOD 100P LCD
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

7. AVR ATmega329/3290/649/6490 Memories
7.1
18
In-System Reprogrammable Flash Program Memory
ATmega329/3290/649/6490
This section describes the different memories in the ATmega329/3290/649/6490. The Atmel
AVR
space. In addition, the ATmega329/3290/649/6490 features an EEPROM Memory for data stor-
age. All three memory spaces are linear.
The ATmega329/3290/649/6490 contains 32/64Kbytes On-chip In-System Reprogrammable
Flash memory for program storage. Since all AVR instructions are 16 or 32 bits wide, the Flash
is organized as 16/32K x 16. For software security, the Flash Program memory space is divided
into two sections, Boot Program section and Application Program section.
The Flash memory has an endurance of at least 10,000 write/erase cycles. The
ATmega329/3290/649/6490 Program Counter (PC) is 14/15 bits wide, thus addressing the
16/32K program memory locations. The operation of Boot Program section and associated Boot
Lock bits for software protection are described in detail in
Write Self-Programming” on page
description on Flash data serial downloading using the SPI pins or the JTAG interface.
Constant tables can be allocated within the entire program memory address space (see the LPM
– Load Program Memory instruction description).
Timing diagrams for instruction fetch and execution are presented in
ing” on page
Figure 7-1.
®
architecture has two main memory spaces, the Data Memory and the Program Memory
15.
Program Memory Map
Application Flash Section
Boot Flash Section
Program Memory
278.
“Memory Programming” on page 293
“Boot Loader Support – Read-While-
0x0000
0x3FFF/0x7FFF
“Instruction Execution Tim-
contains a detailed
2552K–AVR–04/11
®