MCIMX31LVKN5 Freescale Semiconductor, MCIMX31LVKN5 Datasheet - Page 59

• Manufacturer Part Number: MCIMX31LVKN5
• Description: IC MPU MAP I.MX31L 457-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: i.MX31r

Specifications of MCIMX31LVKN5

• Core Processor: ARM11
• Core Size: 32-Bit
• Speed: 532MHz
• Connectivity: 1-Wire, ATA, EBI/EMI, FIR, I²C, MMC/SD, PCMCIA, SIM, SPI, SSI, UART/USART, USB, USB OTG
• Peripherals: DMA, LCD, POR, PWM, WDT
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.22 V ~ 3.3 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 457-MAPBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of I /o: -
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

The timing described in
different timing. The CSI can be programmed to support rising/falling-edge triggered SENSB_VSYNC;
active-high/low SENSB_HSYNC; and rising/falling-edge triggered SENSB_PIX_CLK.
4.3.14.3 Electrical Characteristics
Figure 45
4.3.15
4.3.15.1 Supported Display Components
Table 46
Freescale Semiconductor
SENSB_DATA,
SENSB_VSYNC,
SENSB_HSYNC
SENSB_PIX_CLK
(Sensor Output)
1
SENSB_MCLK
(Sensor Input)
The timing specifications for
SENS_PIX_CLK_POL bit in the CSI_SENS_CONF register is cleared. When the SENS_PIX_CLK_POL is set,
the clock is inverted and all timing specifications will remain the same but are referenced to the falling edge of
the clock.
lists the known supported display components at the time of publication.
IP1
IP2
IP3
IP4
depicts the sensor interface timing, and
ID
IPU
—
Sensor input clock frequency
Data and control setup time
Data and control holdup time
Sensor output (pixel) clock frequency
Display Interfaces
Figure 44
Table 45. Sensor Interface Timing Parameters
Parameter
Figure 45. Sensor Interface Timing Diagram
Figure 45
MCIMX31/MCIMX31L Technical Data, Rev. 4.1
is that of a Motorola sensor. Some other sensors may have a slightly
are referenced to the rising edge of SENS_PIX_CLK when the
IP3
1/IP1
Table 45
IP2
Symbol
Fmck
Fpck
Thd
Tsu
lists the timing parameters.
1/IP4
Min.
0.01
0.01
5
3
1
Max.
133
133
—
—
Electrical Characteristics
Units
MHz
MHz
ns
ns
59