MPC8536BVTATH Freescale Semiconductor, MPC8536BVTATH Datasheet - Page 105

• Manufacturer Part Number: MPC8536BVTATH
• Description: Microprocessors (MPU) 8536 INDUSTRIAL 1250
• Manufacturer: Freescale Semiconductor

Specifications of MPC8536BVTATH

• Processor Series: MPC85xx
• Core: e500
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 1250 MHz
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Interface Type: I2C, SPI, UART
• Minimum Operating Temperature: 0 C
• Package / Case: FCPBGA-783
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.22.1
The AC timing and voltage parameters must be verified at the measurement point, as specified within 0.2 inches of the package
pins, into a test/measurement load shown in
2.23
This section describes the PLL configuration of the MPC8535E. Note that the platform clock is identical to the core complex
bus (CCB) clock.
Freescale Semiconductor
Clocking
Compliance Test and Measurement Load
Figure 70. Minimum Receiver Eye Timing and Voltage Compliance Specification
The reference impedance for return loss measurements is 50. to ground for both the D+ and
D- line (that is, as measured by a Vector Network Analyzer with 50. probes—see
Figure
measurement.
The allowance of the measurement point to be within 0.2 inches of the package pins is
meant to acknowledge that package/board routing may benefit from D+ and D– not being
exactly matched in length at the package pin boundary.
MPC8535E PowerQUICC III Integrated Processor Hardware Specifications, Rev. 3
71). Note that the series capacitors, CTX, are optional for the return loss
D+ Package
D+ Package
D– Package
Figure 71. Compliance Test/Measurement Load
+ Package
Silicon
Pin
Pin
Pin
TX
Figure
71.
C = C
C = C
NOTE
NOTE
R = 50 Ω
TX
TX
R = 50 Ω
Clocking
105