MPC8536BVTATH Freescale Semiconductor, MPC8536BVTATH Datasheet - Page 120

• Manufacturer Part Number: MPC8536BVTATH
• Description: Microprocessors (MPU) 8536 INDUSTRIAL 1250
• Manufacturer: Freescale Semiconductor

Specifications of MPC8536BVTATH

• Processor Series: MPC85xx
• Core: e500
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 1250 MHz
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Interface Type: I2C, SPI, UART
• Minimum Operating Temperature: 0 C
• Package / Case: FCPBGA-783
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Guidelines for High-Speed Interface Termination
The following pins must be connected to XGND if not used:
3.11.3
If the high-speed SerDes 2 interface (SGMII/ SATA) is not used at all, the unused pin should be terminated as described in this
section. There are several Reserved pins that need to be either left floating or connected to X2GND. See SerDes2 in
Table 1Table 1
The following pins must be left unconnected (float):
The following pins must be connected to X2GND:
The POR configuration pin cfg_srds2_prtcl[0:2] on TSEC1_TXD[2], TSEC3_TXD[2], TSEC_1588_PUSLE_OUT1 can be
used to power down SerDes 2 block for power saving. Note that both S2VDD and X2VDD must remain powered.
4
Ordering information for the parts fully covered by this specification document is provided in
Addressed by This Document.”
120
•
•
•
•
•
•
•
•
•
•
•
SD1_RX[7:4]
SD1_RX[7:4]
SD1_REF_CLK
SD1_REF_CLK
SD2_TX[0]
SD2_TX[0]
Reserved pins L8, L9
SD2_RX[0]
SD2_RX[0]
SD2_REF_CLK
SD2_REF_CLK
Ordering Information
SerDes 2 Interface Entirely Unused
for details.
MPC8535E PowerQUICC III Integrated Processor Hardware Specifications, Rev. 3
Section 4.1, “Part Numbers Fully
Freescale Semiconductor