SAF-XC878CM-16FFI Infineon Technologies, SAF-XC878CM-16FFI Datasheet - Page 100

• Manufacturer Part Number: SAF-XC878CM-16FFI
• Description: MCU, 8BIT, 64K FLASH, 5V, 64LQFP
• Manufacturer: Infineon Technologies

Specifications of SAF-XC878CM-16FFI

• Controller Family/series: XC800
• Core Size: 8bit
• Program Memory Size: 64KB
• Ram Memory Size: 3328Byte
• No. Of Timers: 4
• No. Of Pwm Channels: 10
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 4.5V To
• Peripherals: ADC, PWM, Timer
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

XC878CLM
Functional Description
needed for the handshaking between the master and slave tasks is provided by the
master task through the header portion of the frame.
The header consists of a break and synch pattern followed by an identifier. Among these
three fields, only the break pattern cannot be transmitted as a normal 8-bit UART data.
The break must contain a dominant value of 13 bits or more to ensure proper
synchronization of slave nodes.
In the LIN communication, a slave task is required to be synchronized at the beginning
of the protected identifier field of frame. For this purpose, every frame starts with a
sequence consisting of a break field followed by a synch byte field. This sequence is
unique and provides enough information for any slave task to detect the beginning of a
new frame and be synchronized at the start of the identifier field.
Upon entering LIN communication, a connection is established and the transfer speed
(baud rate) of the serial communication partner (host) is automatically synchronized in
the following steps:
STEP 1: Initialize interface for reception and timer for baud rate measurement
STEP 2: Wait for an incoming LIN frame from host
STEP 3: Synchronize the baud rate to the host
STEP 4: Enter for Master Request Frame or for Slave Response Frame
Note: Re-synchronization and setup of baud rate are always done for every Master
Request Header or Slave Response Header LIN frame.
Data Sheet
91
V1.2, 2009-11