SAF-XC878CM-16FFI Infineon Technologies, SAF-XC878CM-16FFI Datasheet - Page 99

• Manufacturer Part Number: SAF-XC878CM-16FFI
• Description: MCU, 8BIT, 64K FLASH, 5V, 64LQFP
• Manufacturer: Infineon Technologies

Specifications of SAF-XC878CM-16FFI

• Controller Family/series: XC800
• Core Size: 8bit
• Program Memory Size: 64KB
• Ram Memory Size: 3328Byte
• No. Of Timers: 4
• No. Of Pwm Channels: 10
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 4.5V To
• Peripherals: ADC, PWM, Timer
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.15
The UART module can be used to support the Local Interconnect Network (LIN) protocol
for both master and slave operations. The LIN baud rate detection feature, which
consists of the hardware logic for Break and Synch Byte detection, provides the
capability to detect the baud rate within LIN protocol using Timer 2. This allows the UART
to be synchronized to the LIN baud rate for data transmission and reception.
Note: The LIN baud rate detection feature is available for use only with UART. To use
LIN is a holistic communication concept for local interconnected networks in vehicles.
The communication is based on the SCI (UART) data format, a single-master/multiple-
slave concept, a clock synchronization for nodes without stabilized time base. An
attractive feature of LIN is self-synchronization of the slave nodes without a crystal or
ceramic resonator, which significantly reduces the cost of hardware platform. Hence, the
baud rate must be calculated and returned with every message frame.
The structure of a LIN frame is shown in
•
•
•
•
Figure 26
3.15.1
LIN header transmission is only applicable in master mode. In the LIN communication,
a master task decides when and which frame is to be transferred on the bus. It also
identifies a slave task to provide the data transported by each frame. The information
Data Sheet
Header, which comprises a Break (13-bit time low), Synch Byte (55
Response time
Data bytes (according to UART protocol)
Checksum
UART1 for LIN communication, software has to be implemented to detect the
Break and Synch Byte.
LIN Protocol
LIN Header Transmission
Header
Structure of LIN Frame
Synch
Protected
identifier
Response
Frame slot
space
Frame
Data 1
Figure
90
Response
26. The frame consists of the:
Data 2
Data N
Functional Description
Checksum
H
), and ID field
XC878CLM
V1.2, 2009-11