NT20S-KBA01 Omron, NT20S-KBA01 Datasheet - Page 75

• Manufacturer Part Number: NT20S-KBA01
• Description: CHEM RESISTANT CVR FOR NT21
• Manufacturer: Omron

Specifications of NT20S-KBA01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2-7-2
Communicating with the PC Using C200H Direct Communication
Connection Method
Caution:
Caution:
Reference: If a C200H-CNjjj or C20H-CNjjj is used as the I/O connection cable, the
Connect the NT20S and PC.
The connection conditions are different for C200H/HS, C200HX/HG/HE and
CjjH.
S Always turn off the power at the PC and PT before connecting the C200H inter-
S After connecting the communication cable, always secure it with the screws.
[I/O connection cable]
Use the following models of I/O connection cable.
£
S Keep the total length of I/O cables used within 12 m (6 m for CjjH).
S The cable’s tensile load is 30 N. Do not subject it to loads greater than this.
connector will project beyond the bottom face of the NT20S.
If the I/O cable is passed through a hole or other opening, the hole or opening must
be at least 53 mmφ. Removing the top cover reduces this requirement to 33 mmφ
or larger. During installation, this cover must be replaced before securing the PT.
For connecting
C200H/HS/HE/HG/HX
C200H/HS/HE/HG/HX
For connecting CjjH
For connecting CjjH
face cable. Otherwise the system may operate unpredictably.
Otherwise the cable may disconnect, causing operation to fail.
The C200H interface side connector of NT20M-CNPjjj has been down-
sized.
Otherwise a discontinuity may occur, causing operation to fail.
C200H-CN311
NT20M-CNP711
C200H-CN711
NT20M-CNP221
C200H-CN221
NT20M-CNP521
C200H-CN521
NT20M-CNP131
C200H-CN131
C20H-CN312
NT20M-CNP712
C20H-CN712
NT20M-CNP222
C20H-CN222
Model
30 cm
70 cm
2 m
5 m
10 m
30 cm
70 cm
2 m
Cable Length (L)
Section 2-7
59