NT20S-KBA01 Omron, NT20S-KBA01 Datasheet - Page 98

• Manufacturer Part Number: NT20S-KBA01
• Description: CHEM RESISTANT CVR FOR NT21
• Manufacturer: Omron

Specifications of NT20S-KBA01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3-5-4
82
Setting the Conditions of Communications with the PC/Host with Memory Switches
Setting RS-232C Communication Conditions (NT20S-ST128)
When using an NT20S-ST128 (using the RS-232C interface for communication
with the host), set the following communication conditions.
S Data Bits
S Stop Bits
S Parity Check
S Flow Control
S Baud Rate
Set the same communication conditions at the host and the NT20S. You are rec-
ommended to set the highest baud rate that can be used by the host and NT20S.
The factory settings are as follows:
S Data Bits
S Stop Bits
S Parity Check
S Flow Control
S Baud Rate
Set the conditions of the communication with the Host by the menu operation from
the System Menu as mentioned below.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting
I/O Check
Init. Memory
Memory Switch
8bits
2bits
Even
None
9600bps
DIP-SW Status
Select “Maintenance Mode”.
Select “Memory Switch”.
Section 3-5