NT20S-KBA01 Omron, NT20S-KBA01 Datasheet - Page 87

• Manufacturer Part Number: NT20S-KBA01
• Description: CHEM RESISTANT CVR FOR NT21
• Manufacturer: Omron

Specifications of NT20S-KBA01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Selecting the Menu Items
System Menu Items
Switching from the System Menu to the RUN mode
Operation modes and the System Menu
Press (touch) a menu item on the screen to select the item.
Menu items allow to make the ON/OFF selection or to call subsequent menu or
screen.
Example 1
To call the “Maintenance mode menu” by pressing the “Maintenance Mode” on the
System Menu screen:
The System Menu items and the functions are as given below.
The NT20S will exit the System Menu and switch to the RUN mode in the cases
mentioned below.
S Selecting “Quit” in the System Menu.
S The screen (touch switches) is not pressed for over 10 seconds.
Quit
Transmit Mode
Maintenance Mode The MAINTENANCE MENU will be displayed to allow the main-
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting
I/O Check
Init. Memory
Memory Switch
Menu Item
The System Menu screen is cleared and the NT20S will return to
the RUN mode.
The Transmit Mode screen will be displayed to allow the trans-
mission of the screen data between the NT20S and the support
tool. For the transmission of the screen data, refer to Section 3-6
Registering the Screen Data (page 86).
tenance of the NT20S system.
DIP-SW Status
Function
Select “Maintenance Mode”.
Section 3-3
71