CJ1W-NC414 Omron, CJ1W-NC414 Datasheet - Page 438

• Manufacturer Part Number: CJ1W-NC414
• Description: High Speed Pulse Train 4 Axes
• Manufacturer: Omron

Specifications of CJ1W-NC414

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

9
9-3 Override
9-13
Override in Operations Other than Memory Operation
Override in Memory Operation
Positioning Operation
Linear Interpolation Operation
Difference by Command
The effective ranges of override in direct operation, interrupt feeding, JOG operation/inching
operation and Origin Return are as follows.
In direct operation, override functions in the same manner as the command speed change
during operation.
If you change the override value during operation, the axis accelerates/decelerates to the
target speed that reflects the override value. If the acceleration/deceleration designation
method is [Acceleration/Deceleration Time Selection], the axis starts to accelerate/decelerate
toward the changed speed from the moment the override is changed.
In memory operation, the operation varies depending on [Command] and [End Pattern].
Override is enabled for each axis.
Use the override of the highest priority axis among the task configuration axes.
Override can be performed at any time during
this span. (While the speed is changing
(accelerating, decelerating) due to an
override change, the speed can be changed
again by changing the override.)
The axis priorities are axis 1, axis 2, axis 3 and axis 4, in the order from high to low.
Reference
Speed
CJ Position Control Units OPERATION MANUAL (CJ1W-NC214/234/414/434)
Override cannot be performed
during deceleration for stopping.
Time