V020-E3-2 Omron, V020-E3-2 Datasheet - Page 109

• Manufacturer Part Number: V020-E3-2
• Description: Publications, Books
• Manufacturer: Omron

Specifications of V020-E3-2

• Lead Free Status / RoHS Status: na

Types of the Buzzer Sounds The following buzzer sounds can be set.
Setting the Buzzer
Various System Settings
Reference: If both the continuous buzzer and the intermittent buzzer are instructed by the
S Continuous sound: The buzzer continues to sound.
S Intermittent sound: The buzzer sounds intermittently at constant intervals.
Host, the continuous buzzer will sound.
Use the memory switches to set whether or not the buzzer sounds when the buzz-
er sound has been instructed by the Host or with a screen attribute or when an
error has occurred.
The factory setting is “ON”, which means that the buzzer will sound when a com-
mand is received from the host, when a screen for which the buzzer attribute is set
is displayed, and when errors occur.
Set the buzzer sound by the menu operation from the System Menu as mentioned
below.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting
I/O Check
Init. Memory
Memory Switch
Comm. Type
Key Sound
Buzzer Sound
Bk light Off
Tool Mode
MEMORY SW MENU
Host Link
OFF
OFF
None
NT20M
DIP-SW Status
(1/2)
WRT&
Page
EXIT
Quit
Select “Maintenance Mode”.
Select “Memory Switch”.
Repeatedly pressing the “Buzz-
er Sound” touch switch cycles
through the setting options
“ON”, “ERR ON”, and “OFF”, in
that order.
(The figure to the left shows the
NT20S-ST121-EV3 screen.)
Section 3-8
93