V020-E3-2 Omron, V020-E3-2 Datasheet - Page 225

• Manufacturer Part Number: V020-E3-2
• Description: Publications, Books
• Manufacturer: Omron

Specifications of V020-E3-2

• Lead Free Status / RoHS Status: na

Cautions when bit input is permitted
Touch switch notification/control and attributes
Simultaneous pressing of multiple touch switches
Lamps, Touch Switches, Numeral Setting
If the touch switches are set in the following positions using the support tool while
the setting is “bit input permitted”, the following operations will occur due to the
configuration of the touch switches.
Take this into consideration when setting touch switch areas.
Example 1:
Touch switches are set at positions A, B, C, and D using the minimum switch set-
ting unit.
Example 2:
Touch switch areas E, F, and G are set.
Inverse and normal display states can be set as attributes of touch switches by
using the support tool. There are slight differences in the operation when a touch
switch is pressed depending on whether bit input is permitted or not permitted.
Bit input not permitted: Touch switch notification by number
Bit input permitted: Touch switch notification by bit information
When a touch switch which is currently lit or flashing is pressed, it is continuously lit
while pressed and returns to its original state when released.
Two or more touch switches can be simultaneously pressed if their statuses are
notified by bit information or if they use different host notification methods. Howev-
er, two or more switches cannot be simultaneously pressed if their statuses are
notified to the host by their numbers.
A
D
The touch switch is lit for 0.2 seconds when pressed and then returns to the
unlit status.
The touch switch is lit while pressed and returns to the unlit status when re-
leased.
E
G
C
B
F
S If switches A, B, and C are turned ON at the
S Similarly, if switches A, B, and D are turned ON
S If switches E and F are turned ON at the same
same time, switch D is also set ON.
at the same time, switch C is also set ON.
time, switch G is also set ON.
Section 6-4
209