V020-E3-2 Omron, V020-E3-2 Datasheet - Page 26

• Manufacturer Part Number: V020-E3-2
• Description: Publications, Books
• Manufacturer: Omron

Specifications of V020-E3-2

• Lead Free Status / RoHS Status: na

1-3
1-3-1
10
System Configuration
System Configuration
Host Link/NT Link (1:1)/C200H direct Systems
Reference: Refer to Section 3-5 “Setting the Conditions of Communications with the Host by
NT20S
Gives displays of production line
monitoring and instructions to the
operation site and notifies the switch
ON/OFF status and numeric value
inputs to the Host.
This section gives the basic configuration of a system which uses an NT20S. Refer
to the manual for individual device for information on the equipment other than the
NT20S in the system.
Using the Memory Switches” on page 75 for the communication method and the
conditions of communications between the NT20S and the Host. It is impossible to
connect a computer to use a support tool and a Host together at the same time.
(except when using an NT20S-ST122-V1)
The principal optional devices for NT20S are as follows;
Replacement backlight NT20S-CFL01 (one white light)
Anti-glare sheet NT20M-KBA04 (five sheets in a pack)
Chemical-resistant cover (made of silicone rubber) NT20S-KBA01
D When using host link/NT
D When using C200H direct
link, RS-232C
RS-232C cable
(for host link)
(Max. 15 m)
communication
I/O connection cable
Computer (support tool)
Connected to NT20S as required and used to transfer
the NT20S screens and make settings for the NT20S.
Computer:
Support tool: NT-ZA3AT-EV2
Host (PC manufactured by OMRON, personal computer, etc.)
Controls NT20S as required while controlling machines and
monitoring the production line.
Host link:
NT link:
RS-232C: Personal computer, FA computer
C200H direct communication:
C series, CQM1, CVM1/CV series PC, CjjH, CQM1,
C200HS, CVM1/CV series:
NT20S can be connected directly to the CPU unit.
CVM1/CV series: NT20S can be used with version [-EV1]
and subsequent versions.
Note that the C series requires a host link unit.
In the CVM1/CV series system, the NT20S can be
connected also to the host link unit.
CQM1, CVM1/CV series PC
CQM1 can be used with CPU41/42/43/44-E.
C200HS can be used with CPU21/23/31/33-E.
CVM1/CV series can be used with [-EV1] CPU unit and
subsequent versions.
C200H, C200HS, C200HX/HG/HE, CjjH PC
IBM PC/AT or compatible
Support tool
Section 1-3