CVM1-PA208 Omron, CVM1-PA208 Datasheet - Page 102

• Manufacturer Part Number: CVM1-PA208
• Description: CV/CVM1 POWER SUPPLY, AC
• Manufacturer: Omron

Specifications of CVM1-PA208

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Turning ON the Power
86
Duplex System Startup
Note When the program contents of both CPU Units change, such as when the CPU
The indicators will appear as shown in the User program transfer/verification
column on page 92 right after the power is turned ON and then change to the
status as shown in the Power ON (After duplex initialization) column.
Units are replaced, the indicator will change to the status for a Duplex Verifica-
tion Error. Refer to 6-2 Error Indicators.
When the CPU Units and Duplex Unit settings have been completed, refer to 4-4
Preparations for Trial Operation.
12. Use the INIT (initialization) switch to initialize Duplex mode. It takes approxi-
11. Connect a Programming Device, such as a Programming Console or the
SYSMAC Support Software, to the PERIPHERAL connector.
mately 10 seconds to complete this initialization without an EM Unit. When
changing the CPU Unit Switches, press the INIT switch to used the new set-
tings.
Section
4-2