CVM1-PA208 Omron, CVM1-PA208 Datasheet - Page 14

• Manufacturer Part Number: CVM1-PA208
• Description: CV/CVM1 POWER SUPPLY, AC
• Manufacturer: Omron

Specifications of CVM1-PA208

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

xiv
Application Precautions
!
Caution
• Always turn OFF the power supply to the PC before attempting any of the fol-
Failure to abide by the following precautions could lead to faulty operation of the
PC or the system, or could damage the PC or PC Units. Always heed these pre-
cautions.
• Fail-safe measures must be taken by the customer to ensure safety in the
• Interlock circuits, limit circuits, and similar safety measures in external circuits
• Always use the power supply voltage specified in the operation manuals. An
• Take appropriate measures to ensure that the specified power with the rated
• Install external breakers and take other safety measures against short-circuit-
• Do not mount a CVM1D Power Supply Unit in a CVM1 or CV-series PC. Doing
• Do not mount a CVM1 or CV-series Power Supply Unit on a Duplex CVM1D
• Do not apply voltages to the Input Units in excess of the rated input voltage.
• Do not apply voltages or connect loads to the Output Units in excess of the
• Disconnect the functional ground terminal when performing withstand voltage
• Install the Unit properly as specified in the operation manual. Improper installa-
• Be sure that all the mounting screws, terminal screws, and cable connector
• Leave the label attached to the Unit when wiring. Removing the label may re-
• Remove the label after the completion of wiring to ensure proper heat dissipa-
• Use crimp terminals for wiring. Do not connect bare stranded wires directly to
• Double-check all the wiring before turning on the power supply. Incorrect wir-
• Mount the Unit only after checking the terminal block completely.
• Be sure that the terminal blocks, EM Units, expansion cables, and other items
lowing. Not turning OFF the power supply may result in malfunction or electric
shock.
event of incorrect, missing, or abnormal signals caused by broken signal lines,
momentary power interruptions, or other causes.
(i.e., not in the Programmable Controller) must be provided by the customer.
incorrect voltage may result in malfunction or burning.
voltage and frequency is supplied. Be particularly careful in places where the
power supply is unstable. An incorrect power supply may result in malfunction.
ing in external wiring. Insufficient safety measures against short-circuiting may
result in burning.
so may result in burning or malfunction.
PC. Doing so may result in unexpected stoppage of the PC.
Excess voltages may result in burning.
maximum switching capacity. Excess voltage or loads may result in burning.
tests. Not disconnecting the functional ground terminal may result in burning.
tion of the Unit may result in malfunction.
screws are tightened to the torque specified in the relevant manuals. Incorrect
tightening torque may result in malfunction.
sult in malfunction.
tion. Leaving the label attached may result in malfunction.
terminals. Connection of bare stranded wires may result in burning.
ing may result in burning.
with locking devices are properly locked into place. Improper locking may re-
sult in malfunction.
• Mounting or dismounting Power Supply Units, I/O Units, CPU Units,
• Assembling the Units.
• Setting DIP switches or rotary switches.
• Connecting or wiring the cables.
• Connecting or disconnecting the connectors.
Memory Cassettes, or any other Units.
5