NAND08GW3B2CN6E NUMONYX, NAND08GW3B2CN6E Datasheet - Page 41

• Manufacturer Part Number: NAND08GW3B2CN6E
• Description: 8GBIT SLC NAND FLASH TSOP
• Manufacturer: NUMONYX

Specifications of NAND08GW3B2CN6E

• Cell Type: NAND
• Density: 8Gb
• Access Time (max): 25us
• Interface Type: Parallel
• Boot Type: Not Required
• Address Bus: 30b
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: TSOP
• Program/erase Volt (typ): 2.7 to 3.6V
• Sync/async: Asynchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 8b
• Number Of Words: 1G
• Supply Current: 30mA
• Mounting: Surface Mount
• Pin Count: 48
• Lead Free Status / RoHS Status: Compliant

NAND04G-B2D, NAND08G-BxC
6.15
6.16
Read ONFI signature
To recognize NAND flash devices that are compatible with the ONFI 1.0 command set, the
Read Electronic Signature can be issued, followed by an address of 20h. The next four
bytes output is the ONFI signature, which is the ASCII encoding of the ‘ONFI’ word. Reading
beyond four bytes produces indeterminate values. The device remains in this state until a
new command is issued.
Figure 32
provides the definition of the output bytes.
Table 20.
Read parameter page
The Read Parameter Page command retrieves the data structure that describes the NAND
flash organization, features, timings and other behavioral parameters. This data structure
enables the host processor to automatically recognize the NAND flash configuration of a
device. The whole data structure is repeated at least five times.
See
The Random Data Read command can be issued during execution of the read parameter
page to read specific portions of the parameter page.
The Read Status command may be used to check the status of read parameter page during
execution. After completion of the Read Status command, 00h is issued by the host on the
command line to continue with the data output flow for the Read Parameter Page command.
Read status enhanced is not be used during execution of the Read Parameter Page
command.
Table 21
the least significant byte of the parameter corresponds to the first byte.
Values are reported in the parameter page in bytes when referring to items related to the
size of data access (as in an x8 data access device). For example, the chip returns how
many data bytes are in a page. For a device that supports x16 data access, the host is
required to convert byte values to word values for its use. Unused fields are set to 0h.
For more detailed information about parameter page data bits, refer to ONFI
specification 1.0, section 5.4.1.
Figure 39
defines the parameter page data structure; for parameters that span multiple bytes,
provides a description of the read ONFI signature waveform and
2nd byte
3rd byte
4th byte
5th byte
1st byte
Read ONFI signature
Byte
for a description of the read parameter page waveform.
Undefined
Value
4Fh
4Eh
46h
49h
ASCII character
Undefined
Device operations
Table 20
O
N
F
I
41/72